Question PC in restart loop after CPU re-paste ?

[Kockasai]

Hey guys! I changed paste on my i7 cpu, I didn’t take it out during the process. After I tryed to start PC it keeps restarting after 1-3sec. I read many topics about the same problem and I tested some things like taking out the small battery for 5min then put it back. Then I played with the RAMs. I didn’t touch them during the process, but now my Pc only starts with 2 of them. I tested them all 4 RAM works fine. Only the left 2 slots work however. I have no clue whats going on. Pleas help

 

[popatim]

Unplug or switch off the power and then pull the processor and see if you over-pasted and some got into the socket.

 

[Kockasai]

It looks nice and clean to me .
https://kepkuldes.com/image/9wKZam
Here is a picture

 

[Kockasai]

You can see on the pic one of the cooler screw stands is missing because when I unscrewed it , it came off.
During paste change, 3 of them did the same. They fell out on the underside of the motherboard.
Could this have damaged the MB or something? Or did I screw it back a bit too hard?

 

[teegray1124]

Did you ever get this resolved and how?

 

[Kockasai]

Did you ever get this resolved and how?

No :/ I still use only 2 rams

 

[Kockasai]

Did you ever get this resolved and how?

Yes today I did!

The cooler was too tight on the motherboard, I dunno why that would be a problem, but we tested everything and that worked only.