I'll make it short: 1. System was working well. 2. Tried to install new graphics card -> that didn't work 3. Put the original graphics card back in (might have hit the mainboard a little) -> PC did not work anymore
When i press the power button I hear the POST beep. After that it seems to try loading the bios but its just an empty window with almost no information. A few seconds later the system reboots automatically in a loop. This is only seen when connected to the gpu. When I connect the monitor to the inernal DVI I don't see anything.
Also tried CMOS reset multiple times.
When i press the power button I hear the POST beep. After that it seems to try loading the bios but its just an empty window with almost no information. A few seconds later the system reboots automatically in a loop. This is only seen when connected to the gpu. When I connect the monitor to the inernal DVI I don't see anything.
Also tried CMOS reset multiple times.
Last edited: