I decided to clean my pc and put some new thermal paste.
Removed the heatsink , applied the thermal paste and then removed the cpu so that I can clean the motherboard out of the dust with cotton, but some of it got stuck in the pins of the cpu socket, so I took a brush and dipped it in medical alcohol and cleaned the cpu socket , then I put everything back together, booted up the pc, fans started working, gpu led lights turned on , the monitor lit up and said no signal , so I turned it off and couldn't turn it back on again , no fans spinning , no lights.
I checked the power cables and switched the CMOS battery and still nothing works.
I also removed the RAM from the slots so I can remove the heatsink.
My question is which component is brocken or I am missing smth.
Removed the heatsink , applied the thermal paste and then removed the cpu so that I can clean the motherboard out of the dust with cotton, but some of it got stuck in the pins of the cpu socket, so I took a brush and dipped it in medical alcohol and cleaned the cpu socket , then I put everything back together, booted up the pc, fans started working, gpu led lights turned on , the monitor lit up and said no signal , so I turned it off and couldn't turn it back on again , no fans spinning , no lights.
I checked the power cables and switched the CMOS battery and still nothing works.
I also removed the RAM from the slots so I can remove the heatsink.
My question is which component is brocken or I am missing smth.
Last edited: