- May 23, 2008
- 69
- 0
- 18,630
Setup:
I7 930 OC @ 3.4ghz on H70 waterblock
Alienware 2310
Radeon 6990 w/OC switch on
GIGABYTE GA-X58A-UD3R LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Thermaltake Toughpower 1000W PSU
2 x Corsair DOMINATOR 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
2 x Western Digital VelociRaptor WD1500HLFS 150GB 10000 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Raid0
Seagate Barracuda St320005N1A1AS-RK 2TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive (backup/fraps)
Thermaltake Element V VL20001W2Z Black Steel SECC / Plastic ATX Full Tower Computer Case
Bigfoot Killer NEC 2100
3DMark11:
P8686
X3450
Both of these results come back with underwhelming results, and under the performance of similiar setups.
The Dominator RAM shows 667MHz (which may be under rated, I may be wrong). I am trying to see what in my setup may be bottlenecking my results and to see if I possibly have an issue. I have run temp checks and the card is running 60C under load, the CPU is 60-65C under load. I posted in the games section - http://www.tomshardware.com/forum/113444-13-black-giving-headache#t688740 about FPS losses during certain portions of different games.
I have also been in contact with HIS, who told me the speed of the card is checking out fine on 3DMark11 (their result was P6017, yet I am unsure if they build the same setup for testing). I am using the most current drivers for the BIOS, graphics card, ect.
If anything else is needed, please let me know. Otherwise, if I seem to be wrong about my setup being slow or having issues, please address this as well. Thank you guys for any help provided.
I7 930 OC @ 3.4ghz on H70 waterblock
Alienware 2310
Radeon 6990 w/OC switch on
GIGABYTE GA-X58A-UD3R LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Thermaltake Toughpower 1000W PSU
2 x Corsair DOMINATOR 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
2 x Western Digital VelociRaptor WD1500HLFS 150GB 10000 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Raid0
Seagate Barracuda St320005N1A1AS-RK 2TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive (backup/fraps)
Thermaltake Element V VL20001W2Z Black Steel SECC / Plastic ATX Full Tower Computer Case
Bigfoot Killer NEC 2100
3DMark11:
P8686
X3450
Both of these results come back with underwhelming results, and under the performance of similiar setups.
The Dominator RAM shows 667MHz (which may be under rated, I may be wrong). I am trying to see what in my setup may be bottlenecking my results and to see if I possibly have an issue. I have run temp checks and the card is running 60C under load, the CPU is 60-65C under load. I posted in the games section - http://www.tomshardware.com/forum/113444-13-black-giving-headache#t688740 about FPS losses during certain portions of different games.
I have also been in contact with HIS, who told me the speed of the card is checking out fine on 3DMark11 (their result was P6017, yet I am unsure if they build the same setup for testing). I am using the most current drivers for the BIOS, graphics card, ect.
If anything else is needed, please let me know. Otherwise, if I seem to be wrong about my setup being slow or having issues, please address this as well. Thank you guys for any help provided.
Facebook
Twitter
Instagram