Please Review my watercooling setup

[freezed1]

Hi, i am building a new water cooling setup, just for the PROCESSOR. Please let me know what you think about the parts and also if any of you have used these parts before and how they performed. All feedback is welcomed. i am running an Intel e4500 @ 3.4ghz. Also the case is HAF 932. The pump i am using is Danger den D5 fixed speed (@ 4 setting). i am currently using another DD water cooling kit which does not perform very well.

http://s283.photobucket.com/albums/kk309/haris525/?action=view&current=wc.jpg

thanks everyone.

 

[rubix_1011]

No to the feser coolant.

Zip ties are probably a lot cheaper at the hardware store.

 

[freezed1]

Hi, thanks for the reply. What do you think i should get instead of feser? they had a review on it and it did pretty well, came very close to distilled water. =], lemme know what you recommend.
thanks

 

[rubix_1011]

Distilled water and some Petras Nuke or similar. Conumdrum posted a thread earlier this week/last week about the premix Feser fluids clogging up a guy's loop.

 

[Conumdrum]

It just happens that water is best. Distilled water is plenty fine and cheap. You'll need a biocide, so Petras PHN Nuke or a Killcoil is all you need. The PHN Nuke is pretty expensive, $2.50 for a bottle, only good for 20-30 loop refills. Shipping is under $2. A killcoil is $8 or so and lasts forever.

And you for sure don't need those screaming deamon fans. LOL they are really loud, even undervolted. Get 3 HS Yate Loons from Petras for under $20. VERY popular fans. That rad your getting is a good one and will perform very well with those fans on a fan controller turned down to 7 volts or so.

Few more stores you can shop for best prices etc.
Stores
http://www.dangerden.com
http://www.petrastechshop.com/
http://www.sidewindercomputers.com/
http://www.jab-tech.com/
http://www.performance-pcs.com