Ok before I start, heres my specs
Viotek Black ATX Mid Tower Gaming Computer Case W/ 120MM & 80MM RED LED, USB 3.0
ASUS Z97-A ATX DDR3 2600 LGA 1150 Motherboards Z97-A
Intel 4670K 3.4 GHz Quad-Core (BX80646I54670K) Processor
Cooler Master Hyper TX3 - CPU Cooler with 3 Direct Contact Heatpipes
EVGA 02G-P4-2763-RX GeForce GTX 760 2GB 256-Bit GDDR5 PCI Express 3.0 SLI Suppor
1 x ADATA XPG V1.0 8GB 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model AX3U1600W8G9-RB
850W Gaming 120MM Fan Silent ATX Power Supply SATA 12V
Seagate Barracuda 1 TB HDD SATA 6 Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Driv ST1000DM003
Anyway just a heads up, I am new at this so bear with me and this is my first from ground up build.
I've been in the bios tring to figure this out for 2 days now. To start first I went for the EZ method in the EZ tuner. I go ahead and go through the EZ tune, then when it reboots my monitor says no frequency after reboot.
I've also tried some manual tuning like bumping up the core multiplier up to 40 and same result after reboot. The only way to fix it so my monitor picks up frequency again is by removing cmos battery from mobo and resetting it and I've had to do that numerous times and that cant be good in its self....
Anybodies help/ assistance would be MUCH appreciated.........
Viotek Black ATX Mid Tower Gaming Computer Case W/ 120MM & 80MM RED LED, USB 3.0
ASUS Z97-A ATX DDR3 2600 LGA 1150 Motherboards Z97-A
Intel 4670K 3.4 GHz Quad-Core (BX80646I54670K) Processor
Cooler Master Hyper TX3 - CPU Cooler with 3 Direct Contact Heatpipes
EVGA 02G-P4-2763-RX GeForce GTX 760 2GB 256-Bit GDDR5 PCI Express 3.0 SLI Suppor
1 x ADATA XPG V1.0 8GB 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model AX3U1600W8G9-RB
850W Gaming 120MM Fan Silent ATX Power Supply SATA 12V
Seagate Barracuda 1 TB HDD SATA 6 Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Driv ST1000DM003
Anyway just a heads up, I am new at this so bear with me and this is my first from ground up build.
I've been in the bios tring to figure this out for 2 days now. To start first I went for the EZ method in the EZ tuner. I go ahead and go through the EZ tune, then when it reboots my monitor says no frequency after reboot.
I've also tried some manual tuning like bumping up the core multiplier up to 40 and same result after reboot. The only way to fix it so my monitor picks up frequency again is by removing cmos battery from mobo and resetting it and I've had to do that numerous times and that cant be good in its self....
Anybodies help/ assistance would be MUCH appreciated.........
Facebook
Twitter
Instagram