Hi!
After reading a lot of posts about the same issue but without any solutions, I'm resorting to my own post.
The problem:
My PSU will shut down immediately after shorting the POWER_SW. The PSU makes a clicking sound after lighting up and starting the fans for almost one second. This issue is present once the CPU is in the socket of the MB. Also, The EZ debug LED turns red for a short while, too. After a few seconds it'll attempt a new boot and then it'll shutdown and click just as before. It's a loop.
The PSU won't shut down once I've removed the CPU and cooler. It runs fine without the CPU in the socket.
The CPU is supported by the MB according to the MSI site. However, I've updated the MB to version 7D91vH2 just to be sure.
Components:
At this moment, I'm very lost and don't know how to continue. Any help is appreciated a lot.
Cheers,
Don
After reading a lot of posts about the same issue but without any solutions, I'm resorting to my own post.
The problem:
My PSU will shut down immediately after shorting the POWER_SW. The PSU makes a clicking sound after lighting up and starting the fans for almost one second. This issue is present once the CPU is in the socket of the MB. Also, The EZ debug LED turns red for a short while, too. After a few seconds it'll attempt a new boot and then it'll shutdown and click just as before. It's a loop.
The PSU won't shut down once I've removed the CPU and cooler. It runs fine without the CPU in the socket.
The CPU is supported by the MB according to the MSI site. However, I've updated the MB to version 7D91vH2 just to be sure.
Components:
- Thermaltake Toughpower modulair GF1 ARGB 850W
- Intel® Core i7-13700K, 3,4 GHz CPU
- MSI MAG Z790 Tomahawk WIFI MB
- Noctua NH-D15 chromax.black CPU cooler
- picture of cpu
- picture of cpu socket https://i.imgur.com/ifzHpom.jpg
- picture of MB top view
- picture of PSU connectors
At this moment, I'm very lost and don't know how to continue. Any help is appreciated a lot.
Cheers,
Don
Last edited: