Question Reduced graphics performance since changing the CPU ?

[Aurel-_]

Hello, since I changed my CPU I have much less performance with my graphics card like for example Time Spy where I only do 18000 in graphics score instead of 31000 before the change.
userbenchmark bench result: https://www.userbenchmark.com/UserRun/68696110
3DMark result: https://www.3dmark.com/3dm/118149504?

CPU: Threadripper 7960x
RAM: 4x16gb kingston fury DDR5 ECC 6400 MT/S
MOTHERBOARD: TRX50 AERO D GIGABYTE REV 1.2
GPU: RX 7900 XTX SAPPHIRE NITRO +

PSU: 2x 1000W Corsair RM 1000 X
(one for motherboard and CPU and the other for GPU and 4 x HDD, 2 x NVMe SSDs 1To and 2To

Windows 11 and all drivers are up to date but Cyberpunk tells me my GPU driver is not up to date and i dont know why

if i play a game, whether it's Starfield or Cyberpunk, my GPU driver crashes after 10 to 15 min.
I tried a fresh install of Windows 11 and used DDU everytime i switched driver. I'm starting to run out of ideas about what the cause could be.

I know Threadripper CPUs are not the best for gaming but i do a lot of CPU-intensive tasks and I like to game sometimes.

 

[triplex1]

why don't you put the old one back since you had a score of 31000?
and you didn't tell us what the old one was

 

[Aurel-_]

my old cpu was a 5950x with 64gb of ram 3200mhz i sold everything to my friend and I'm not going to put back my old cpu since this one is much more powerful for 3D.
Sorry i forgot to put the old one

 

[triplex1]

my old cpu was a 5950x with 64gb of ram 3200mhz i sold everything to my friend and I'm not going to put back my old cpu since this one is much more powerful for 3d
Sorry i forgot to put the old one

The problem and the difference between the scores you have is in your graphics card, not in the CPU.
Look at the settings of the card.

 

[Aurel-_]

for my gpu everything is like before an undervolt/overclock and I have already tried without too
gpuz screenshot https://ibb.co/ZzNzmfX
if you want some screenshot tell me

 

[triplex1]

for my gpu everything is like before an undervolt/overclock and I have already tried without too
gpuz screenshot https://ibb.co/ZzNzmfX
if you want some screenshot tell me

the score of the card is not determined by the processor but basically the same card and in your case it cannot work as before because you have changed the platform, so look at the settings of the card and also in the bios of your motherboard

 

[Aurel-_]

what should I check in the bios?
or even on the card?
sorry but I'm a bit lost

 

[triplex1]

what should I check in the bios?
or even on the card?
sorry but I'm a bit lost

You have already asked a question in the amd community and no one has answered so far, the settings I am talking about have mainly to do with Adrenaline, and from the bios I have them enabled for the card.
Right now I'm on a laptop because I have a power cut so I can't check my PC to tell you what settings I have on my own card.

 

[Aurel-_]

yes that's why I came to ask my question here

If you talk about the 4g decoding and resizable bar i already disable and enable it before and after i install the driver

 

[Aurel-_]

I just tried several things I enabled/disabled SAM before and after a new installation of the drivers with DDU
I forced my pcie slot to be in pcie 4.0 x16 in the bios
disable all possible virtualizations of windows 11 and then reactivate them
all this did not change anything it's still the same
Does the CPU somehow limit the GPU?

 

[Unolocogringo]

You completely built a new computer with a different motherboard.
Did you do a clean fresh windows install? Not a repair or reset of windows. A fresh install from USB downloaded from Microsoft?
Did you change the video card or is it the same one?

https://www.microsoft.com/software-download/windows11

 

[triplex1]

I just tried several things I enabled/disabled SAM before and after a new installation of the drivers with DDU
I forced my pcie slot to be in pcie 4.0 x16 in the bios
disable all possible virtualizations of windows 11 and then reactivate them
all this did not change anything it's still the same
Does the CPU somehow limit the GPU?

Although the cards are not the same, you try.
In any other case, you are looking to find out why the platform you created is not the same as the one you had, and as the friend said, clean win from begin for a new computer and not an old one, installation from begin, that is your problem

 

[Aurel-_]

You completely built a new computer with a different motherboard.
Did you do a clean fresh windows install? Not a repair or reset of windows. A fresh install from USB downloaded from Microsoft?
Did you change the video card or is it the same one?

https://www.microsoft.com/software-download/windows11

I reinstalled Windows with a bootable USB key and formatted all my disks. and its the same gpu

 

[Aurel-_]

Although the cards are not the same, you try.
In any other case, you are looking to find out why the platform you created is not the same as the one you had, and as the friend said, clean win from begin for a new computer and not an old one, installation from begin, that is your problem

I never touched anything in the record and stream tab
and I just reinstalled windows and it's still the same