Question Sahara P35 case

[AneurinFWJH]

I am finally starting to make my computer, I found that the RGB fan hub (I don't know the actual name) is powered with a molex, Should I get a Molex to fan adaptor and plug it into my motherboard or a molex to PCI-E adaptor?
I don't know which to get as I recall hearing that powering multiple fans on one header is dangerous for the motherboard.
Here is the case : https://www.ebuyer.com/834537-sahar...aCdPrVKnGT90-6I4gYetn86VGGBJZSvhoCaOIQAvD_BwE

Here is a picture of the Fan controller :

https://imgur.com/a/gLT0VZ5

View: https://imgur.com/a/gLT0VZ5

 

[jay32267]

Ideally I would come off the PSU.
You don't need that power flowing through your MB.

 

[AneurinFWJH]

Ideally I would come off the PSU.
You don't need that power flowing through your MB.

I got it plugged into the PSU but they do not turn on, I haven't got any RAM or a CPU installed right now but that wouldn't affect is as the power is from the PSU right?

 

[Han_Zsolo]

Hi, i have a Sahara p37 case and i have the same problem. I tested the psu with a wire (green&black) works perfectly but when the 24 pin is plugged in into the motherboard only the rgb lights of the motherboard works. Is it possible that need to be set it up from bios?