Scythe Mine Rev.B or Scythe Ninja Rev.B ?!

[P-Trix]

I have both Scythe Mine Rev.B and Scythe Ninja Rev.B! I am currently using the Mine, over the last few days it has got really cold so we have resorted to using the central heating in the house!

Today and last night, my PC has restarted it self a few times - i noticed it was 48oC idle earlier today! So i underclocked it and it's back stable again!

Would i be better using the Ninja, or maybe just swapping the stock fan for a 12cm one on the Mine!?

Any help appriciated! Thanks

 

[3lfk1ng]

Well, you have both of them so why not try one vs the other.

Whichever one gives you a better temperature results is the one you should use.

Run parallel tests on both of them to get the best results

Ex:
Run prime95 for ~30min on the mine then check the temps
thne
Run prime95 for ~30min of the Ninja then check the temps

Or replace prime95 with an instense game...then compare.

 

[P-Trix]

Well, you have both of them so why not try one vs the other.

Whichever one gives you a better temperature results is the one you should use.

Run parallel tests on both of them to get the best results

Ex:
Run prime95 for ~30min on the mine then check the temps
thne
Run prime95 for ~30min of the Ninja then check the temps

Or replace prime95 with an instense game...then compare.

Well i did think of this, i just thought i would ask some people first as the Ninja is boxed new and unused so thought i could sell on Ebay! But i guess i could try them both, and sell the one i don't use as Used!

I have noticed quite a drop in temp when i open my windows and give the room a real good blow through of cold outside air, but it's my bedroom... so i don't want it freezing cold all the time!
Thanks, will prob give a try tomorrow!