Question Setting ram to 3200MHZ crashes my PC after installing new cpu

[Keberino]

Hi all. I've been running into problems with my recently installed Ryzen 5 5600x, and I've looked around. When I first installed my Ryzen 5 5600x and booted it up, there was a problem. Once I tried running certain things and doing stress tests, the PC went up and just shut down without warning.

My motherboard is an A320M-HDV-R.40 which is pretty bad I've heard once you install a Ryzen 5 5600x from some people since you have to update the bios which is unreliable (?), but I don't want to go through the process of swapping it out since I sadly admit, it is a pre-built. I have an EVGA 850W GD PSU which should be plenty enough. I've recently learnt that setting my ram to a frequency of 3200mhz or 2666mhz causes it to crash even with higher voltage. I assume it's a mobo problem not being able to handle it or a thermal problem. It ran completely fine with my Ryzen 5 1600 with 3200mhz ram at 3.50 voltage. Any advice would be appreciated, thanks.

SPECS
CPU - RYZEN 5 5600x (Ryzen 5 1600 before the upgrade and Stealth Wraith Cooler)
GPU - RTX 2060
MOTHERBOARD - ASROCK A320M-HDV-R4.0 (BIOS version is 7.10, the one that lets Ryzen 5 5600x work)
MEMORY - CORSAIR Vengeance LPX 2x8 16GB DDR4 3200mhz
CASE - Not too sure, it's a CyberPowerPC

 

[boju]

This might interest you. Regarding suggestions on ram settings/ config to troubleshoot and placing fan to help cool vrms.

https://forum.asrock.com/forum_posts.asp?TID=23457&PID=97837&title=a320m-hdv-r4-0-and-5600x

 

[KananX]

a bios update could improve ram compatibility and do away with the problems.

 

[Keberino]

This might interest you. Regarding suggestions on ram settings/ config to troubleshoot and placing fan to help cool vrms.

https://forum.asrock.com/forum_posts.asp?TID=23457&PID=97837&title=a320m-hdv-r4-0-and-5600x

I saw this site, yeah I was thinking I might have to place a fan to cool the VRMs but I'll check it out more intensively, thanks.

 

[Keberino]

a bios update could improve ram compatibility and do away with the problems.

I updated to P7.10 which is the update that allows the Ryzen 5 5600x to run but there's P7.20 which I'm not sure helps RAM compatibility. But I'll look more into it, thanks.