I just bought one of these PSUs and notice that on the mobo end of the 24-pin cable, there is a 330uF, 6.3v cap installed across two of the pins (see link). Can anyone tell me why this would be needed? I make all my own custom cables and was wondering if it would do any harm if the cap was excluded.
https://www.dropbox.com/s/uit20vddas96glx/20200117_233251.jpg?dl=0
Thank in advance
Trevor
https://www.dropbox.com/s/uit20vddas96glx/20200117_233251.jpg?dl=0
Thank in advance
Trevor