Soon I'm going to be sleeving my psu cables, I've done it before but never each individual cable. To my question lol, what is a good heat shrink diameter to use for single sleeved cables with 1/8" sleeving?
I would use 1/4 inch or 3/8 inch if you can find some. 1/2 inch might work, but that might not make a very tight sleeve. it should be loose enough to easily slip on, but not to the point at which it is several times larger.
I would use 1/4 inch or 3/8 inch if you can find some. 1/2 inch might work, but that might not make a very tight sleeve. it should be loose enough to easily slip on, but not to the point at which it is several times larger.