I was playing doom 2016 and recording it locally with obs-nvenc 16000 kbit 2560x1440 30 fps to test out my gtx 1060 nvenc powers
It was pretty laggy and then bsod happened -> KERNEL_DATA_INPAGE_ERROR
Never had this error before
*** STOP: 0x0000007a (0xfffff6fb400000f0, 0xffffffffc000000e, 0x000000003530b884,
0xfffff6800001e000)
*** USBD.SYS - Address 0xfffff8800ed006a0 base at 0xfffff8800438e000 DateStamp
0x4a5bcbff
I googled what the hell is that and it says that its either ram or hdd or motherboard or hdd cable.
No specifics as always, but since I was writing on hdd I decided to check my hdd that I was writing on - not a system one. So I did a chkdsk G: /f /r , it said it cant do it now and I need to reboot. Rebooted into this:
http://imgur.com/g4vSmV8.jpg
http://imgur.com/djZazMr.jpg
http://imgur.com/xqK1z1c.jpg
This screen happened after usual 'press delete or f2 to enter bios' and the usual turquoise dots indicating that windows is loading (I tweaked something long time ago and now it loads like this - only with this turquoise dots, you can see them here http://imgur.com/g4vSmV8.jpg on the left)
This small stripes kept appearing for like 10 seconds and then stopped. I thought something bugged out and chkdsk is going on so I didnt rebooted. Waited for 5 min pressed enter, esc, waited another 15, rebooted, stripes again. Tried safe mode - some filenames appeared on screen, then dots showed again.
So I removed my gtx 1060 and booted from 4770k internal one on a different monitor (used display port one, switched to old dvi). Now after blinking underscore theres just a black screen with nothing happens. Choosed 'last working configuration' and I finally booted. Put back gtx 1060 and everything works now (on new display port monitor)
SMART of all my hdd's
http://imagizer.imageshack.com/img923/6785/xeL5MD.jpg
http://imagizer.imageshack.com/img923/1734/sTLdbO.jpg
http://imagizer.imageshack.com/img923/5822/CVBIQx.jpg
http://imagizer.imageshack.com/img923/2761/5fgmAH.jpg
The one with two warnings is not the one I was checking and writing, its the hds5c3020ala632
But now my system loads way slower than before this all happened. Now it stays about 20 seconds on welcome screen, and then screen goes black with only cursor on it for another 10-15 seconds, and only after the welcome sound plays
So what should I do now? Chkdsk make my computer die, not gonna try this high bitrate recording again I guess. What was the reason of this artifacts? Dying GPU?
It was pretty laggy and then bsod happened -> KERNEL_DATA_INPAGE_ERROR
Never had this error before
*** STOP: 0x0000007a (0xfffff6fb400000f0, 0xffffffffc000000e, 0x000000003530b884,
0xfffff6800001e000)
*** USBD.SYS - Address 0xfffff8800ed006a0 base at 0xfffff8800438e000 DateStamp
0x4a5bcbff
I googled what the hell is that and it says that its either ram or hdd or motherboard or hdd cable.
No specifics as always, but since I was writing on hdd I decided to check my hdd that I was writing on - not a system one. So I did a chkdsk G: /f /r , it said it cant do it now and I need to reboot. Rebooted into this:
http://imgur.com/g4vSmV8.jpg
http://imgur.com/djZazMr.jpg
http://imgur.com/xqK1z1c.jpg
This screen happened after usual 'press delete or f2 to enter bios' and the usual turquoise dots indicating that windows is loading (I tweaked something long time ago and now it loads like this - only with this turquoise dots, you can see them here http://imgur.com/g4vSmV8.jpg on the left)
This small stripes kept appearing for like 10 seconds and then stopped. I thought something bugged out and chkdsk is going on so I didnt rebooted. Waited for 5 min pressed enter, esc, waited another 15, rebooted, stripes again. Tried safe mode - some filenames appeared on screen, then dots showed again.
So I removed my gtx 1060 and booted from 4770k internal one on a different monitor (used display port one, switched to old dvi). Now after blinking underscore theres just a black screen with nothing happens. Choosed 'last working configuration' and I finally booted. Put back gtx 1060 and everything works now (on new display port monitor)
SMART of all my hdd's
http://imagizer.imageshack.com/img923/6785/xeL5MD.jpg
http://imagizer.imageshack.com/img923/1734/sTLdbO.jpg
http://imagizer.imageshack.com/img923/5822/CVBIQx.jpg
http://imagizer.imageshack.com/img923/2761/5fgmAH.jpg
The one with two warnings is not the one I was checking and writing, its the hds5c3020ala632
But now my system loads way slower than before this all happened. Now it stays about 20 seconds on welcome screen, and then screen goes black with only cursor on it for another 10-15 seconds, and only after the welcome sound plays
So what should I do now? Chkdsk make my computer die, not gonna try this high bitrate recording again I guess. What was the reason of this artifacts? Dying GPU?
Facebook
Twitter
Instagram