Hi everyone I am having a problem with my video card since overclocking. So here is the story I have a GTX 1070, specifically the GeForce GTX 1070 G1 Gaming 8 Gig video card that I overclocked with a +110 on the core clock and +500 on memory clock. I started with the memory first raising it slowly and then testing for stability and repeated until I hit a wall. I then did the same for the core clock, slowly raising it and stress testing until I hit a wall. Once I found the max for both the memory and core clock I applied both to just below the point at which they were unstable ans stress tested the two settings together with Unigen Heaven. After about an hour to an hour and a half there were no problems, no artifacts, no crashes nothing and the temperature stayed pretty decent it was in the very high 60's to low 70's. Now I started to play games and it is very frustrating because while 90-95% of my games are running fine with no problems there are a few that are crashing. It has to be the overclock because before that the games were running fine. What do I do now? The problem is that in the stress test everything passed so I don't know what is causing the problem the VRAM overclock or the Core Clock overclock. Do I lower both and if so by how much? Or do I unlock the voltages and apply a slight power boost? Maybe in those games the demand for power is greater then what is being supplied? Thanks
Last edited: