So I got WD My Book Duo a long time ago which came with 2x WD Red 4TB. So far no issues. I recently decided to upgrade it to 2x WD Red Plus 8TB. I used WD Drive Utilities' "Drive Status Check", "Quick Drive Test", and "Complete Drive Test" on each of these drives and they both passed all the tests. However, after I set it to RAID 1 and started backing up my data it started making spooky sounds. I know hard drives are mechanical so noise is inevitable, but I've never heard these sounds before so I am a bit worried. So far I've recorded three different sounds its made. Are these sounds normal?
0:00 - 0:10: sound 1
0:10 - 0:40: sound 2
0:40 - 0:51: sound 3
I'm using Acronis True Image for Western Digital for my backup. WD Security, WD Utility, and Acronis True Image for Western Digital are up to date and I am on Windows 11 24h2.
Edit:
System Info
PSU: Lian Li EDGE 1000W 80+ Platinum
MB: ASRock Phantom Gaming X870E Nova WiFi (bios 3.30, chipset 7.06)
CPU: AMD Ryzen 9 7950X
GPU: MSI EXPERT GeForce RTX 4070 Ti SUPER 16 GB
RAM: Corsair Vengeance RGB (4 x 16 GB) DDR5-6000 CL30 Memory
* The RAM was two sets of 2x16 GB DDR5, EXPO has been turned on in the BIOS*
Storage:
Samsung 990 Pro 1TB (20% full)
Samsung 990 Pro 4TB (46% full)
Samsung 990 Evo 1TB (17% full)
Samsung 990 Evo Plus 2TB (13% full).
*Samsung Magician's Full Scan and Extended SMART Self-test also shows no errors*
All of the above parts are around 6 - 24 months old, purchased new and imo I think I've taken good care of them so their condition should still be "good".
Backup Storage:
WD My Book Duo enclosure is probably 5+ years old at this point. Although the 2x8TB WD Red Plus drives were purchased within the last three months.
WD My Book Duo enclosure comes with RAID 0, RAID 1, or JBOD. I don't know if this is a hardware thing in their enclosure or a software thing in their WD Drive Utilities. I'm hoping to use RAID 1 for backup and currently both 8TB Red Plus drives have been formatted so they are effectively empty.
Connected peripherals:
Logitech mouse
Corsair keyboard
Razer speaker
Wifi dongle
2 monitors connected to GPU
OS: Windows 11 Pro 24h2, Build 26100.4652
0:00 - 0:10: sound 1
0:10 - 0:40: sound 2
0:40 - 0:51: sound 3
I'm using Acronis True Image for Western Digital for my backup. WD Security, WD Utility, and Acronis True Image for Western Digital are up to date and I am on Windows 11 24h2.
Edit:
System Info
PSU: Lian Li EDGE 1000W 80+ Platinum
MB: ASRock Phantom Gaming X870E Nova WiFi (bios 3.30, chipset 7.06)
CPU: AMD Ryzen 9 7950X
GPU: MSI EXPERT GeForce RTX 4070 Ti SUPER 16 GB
RAM: Corsair Vengeance RGB (4 x 16 GB) DDR5-6000 CL30 Memory
* The RAM was two sets of 2x16 GB DDR5, EXPO has been turned on in the BIOS*
Storage:
Samsung 990 Pro 1TB (20% full)
Samsung 990 Pro 4TB (46% full)
Samsung 990 Evo 1TB (17% full)
Samsung 990 Evo Plus 2TB (13% full).
*Samsung Magician's Full Scan and Extended SMART Self-test also shows no errors*
All of the above parts are around 6 - 24 months old, purchased new and imo I think I've taken good care of them so their condition should still be "good".
Backup Storage:
WD My Book Duo enclosure is probably 5+ years old at this point. Although the 2x8TB WD Red Plus drives were purchased within the last three months.
WD My Book Duo enclosure comes with RAID 0, RAID 1, or JBOD. I don't know if this is a hardware thing in their enclosure or a software thing in their WD Drive Utilities. I'm hoping to use RAID 1 for backup and currently both 8TB Red Plus drives have been formatted so they are effectively empty.
Connected peripherals:
Logitech mouse
Corsair keyboard
Razer speaker
Wifi dongle
2 monitors connected to GPU
OS: Windows 11 Pro 24h2, Build 26100.4652
Last edited: