Question SSD issue detection

[LuKaWin10]

Hello, I have a big problem. When I boot up my PC it shows me this (

https://imgur.com/a/TPbSjHj

View: https://imgur.com/a/TPbSjHj
). It just doesn-t go through the devices that are shown, and I literally cannot open Windows. I don't know how to explain this, my SSD does not detect but HDD does. My Mobo is P35-DS3 rev 2.1, I flashed my BIOS yesterday and it went without any issues, everything worked. My SSD is ADATA SU650 512 GB. All my ports I think are good. What could be the issue? My BIOS detects it and everything perfectly boots up when it is in IDE but in AHCI SATA nothing works.

 

[rgd1101]

reset the bios?

 

[LuKaWin10]

reset the bios?

You mean take out the CMOS battery? I will try that, I thought of that, I will do it soon then answer here! I even reflashed my BIOS and it did not work!

 

[SkyNetRising]

My BIOS detects it and everything perfectly boots up when it is in IDE but in AHCI SATA nothing works.

So - you are changing sata controller mode from IDE to AHCI ? Right?
You can try booting into windows safe mode and that should reset sata controller driver.

But normally changing sata controller mode requires reinstallation of windows.

Why can't you use IDE mode anymore?
That obviously was appropriate setting before BIOS update.