Question Thermaltake Riing 12 Plus Premium Fan

[majorghn]

I need to re-install my Riing 12 Plus Premium fan into the new case, I originally had it in my old Chaser case, the cable that plugs into the USB port on the MB has two micro USB wires coming out of it, I know one goes into the controller where does the other one go, the controller has no spot for it, the fan has power but no color, the little LED's do not light up? Can you help me out with this? Thanks

 

[lolnole]

It sounds like you connected it correctly. If you are using only one controller, then the other micro USB is unused. Do the LED's not light up through the software?

Here is the manual for reference:

https://www.thermaltake.com/db/support/usermanual/_f850d5a03ddd4a3cb4b173b20687ea8f.pdf

 

[majorghn]

It sounds like you connected it correctly. If you are using only one controller, then the other micro USB is unused. Do the LED's not light up through the software?

Here is the manual for reference:

https://www.thermaltake.com/db/support/usermanual/_f850d5a03ddd4a3cb4b173b20687ea8f.pdf

 

[majorghn]

No fan spins just no lights come on

 

[majorghn]

I can't make out what that manual says