Tom's Hardware Member System Gallery

Page 192 - Seeking answers? Join the Tom's Hardware community: where nearly two million members share solutions and discuss the latest tech.
Re-modified the front panel on my Define S. Originally, it looked like this, but I was never happy with it after the first version was done because the union jack perforated metal sheet just didn't look right once it was painted.

DQisvsp.jpg


ot7Ozgm.png


OUvidse.jpg





I also INCREASED the mesh area, in addition to changing to a more traditional "mod mesh" type perforated metal. Much happier, but still deciding if I'm going to put the S emblem back on or go a different direction.



sMZyXQk.jpg


35CIdjH.jpg


SNBbuTR.jpg


jGqcTSE.jpg


YK9zdBl.jpg


LmSCWva.jpg


rMY4hEG.jpg
 
Last edited:
  • Like
Reactions: Eximo
View: https://imgur.com/exvkDun

View: https://imgur.com/vxgzMUI


View: https://imgur.com/fYsurEx


View: https://imgur.com/JWvuMOI


Personally never have messed around with ITX until now. Good things do come in small packages.

Its nothing impressive spec-wise, but it gets the job done:

i5 7500
Thermaltake CPU cooler
2x8gb G.skill Aegis 3200mhz (downclocked to 2400mhz)
Gigabyte H110N ITX
Corsair force 120gb NVME
Kingston A400 240gb SATA
EVGA XC GTX1660
SeaSonic M12ii EVO 520w
Cooler Master Elite 110 Case

The 2x8gb Ripjaws 2400mhz ram I ordered for this pc was DOA, and I'm waiting on G.skill RMA. I ripped my 2x8gb Aegis 3200mhz outta my main pc and put it in here. I bought a 2x8gb 4000mhz CL18 kit for my main pc for just $79, which might be a little out of the league of my B350 board, though it previously handled a 3600mhz kit oc to 3833mhz.

This GPU has a 2.75 slot cooler and 3 slot backplate. It fit in the case, but the case only has room for a dual-slot bracket, so i had to modify the bracket on the 1660 to make it work.

This motherboard is THE DEFINITION of mediocre. The m.2 slot is on the back of the board, which is annoying to access.
 
That actually would probably work. It would work even better if you were to remove the coating where the thermal pad contacts the chassis. I wouldn't worry about it though unless you can actually verify that there is a throttling condition happening.
 

kav1257

Prominent
Sep 6, 2020
18
2
515
Finally completed my first build, all white Asus Rog Build. Had some issues with thermal paste on the CPU as mentioned in a previous thread.

PC will be used for my new gaming YouTube Channel build video will be up soon :D

Awaiting Asus Rog 3080 Graphics Card to finish it off. Then ill change the monitor but for now this will have to do as temporary.

Specs:
AMD Ryzen 9 12 Core
32GB Triden Z Royal ×4 8GB Memory
Asus Rog White Edition AIO CPU Cooler
Asus Rog White Edition 850w Power Supply
Asus Rog Strix Helios White Edition Case
Corsair Triple 120mm White RGB Fans
Corsair 120mm White RGB Fan
Corsair Commander Pro
500GB Seagate FireCuda SSD
Corsair 256GB M2
Elgato 4K Gaming Capture Card
IMG-20200917-125534-514.jpg



20200919-001051.jpg


20200919-001117.jpg


IMG-20200917-212054-789.jpg
 
Last edited:

kav1257

Prominent
Sep 6, 2020
18
2
515
Haha yeah compared to my old case it is, but will fit a 3080 no problems and then one day when I feel confident ill attempt a custom water-cooled build tried to future proof the build ,:D
 
I had never bought a gaming prebuilt before, but when I saw a Cyberpower pc with an i5 6402p, RX480, and 16gb ram for $250 locally, it caught my eye.

The pc had 1 really bad photo where the GPU wasn't even in the PC, but when I met the guy everything checked out so I bought it on Sunday. Ended up negotiating to $200.

It was extremely dusty, and gave me some allergy issues after cleaning it, but overall it was in great shape. The plastic hadn't even been peeled off of the window yet. I took care of that peel.

I was pleasantly surprised as it didn't use the cheapest possible parts like I'm used to.

i5 6402p (had to google it, its a 6400 with 100mhz higher clock speed and a weaker IGPU)
The cooler might be this
Gigabyte B150M Gaming Motherboard
16gb (2x8gb) Crucial Balistix 2400mhz
Gigabyte G1 Gaming RX480 4gb
Toshiba 1tb HDD
Thermaltake Smart 600w 80+
Cyberpower branded Cooler Master Masterbox 5 with 3 red fans
netgear wifi adapt

The motherboard isn't the cheapest H110 possible that would work, like they usually do. This one is considerably better and actually has 4 ram slots, M.2 slot, and an 8 pin power plug.
The ram is a very nice Crucial kit, and even in dual channel. I expected some single channel 2133mhz garbage, perhaps green oem stuff.
The GPU is a nicer model with RGB leds on the side and a decent cooler. It is the cheaper 4gb version, but I expected this and its not really any issue.
The PSU is not good, but better than I expected. It's not some random no name oem unit or something similar, at least. Its lasted 4 years so far.

I needed the case for a quick flip of another PC, so I sold that case with some other parts in it and bought a new case.

I added a 120gb NVME I had lying around, which made the boot time 19 seconds as opposed to 1 minute 19 seconds before with the HDD then threw it into the new case. Heres a photo.
https://ibb.co/q0dZkLw
I do not actually have a good photo of this pc before the case swap, but here is the case it came in, just with different HW inside.
https://ibb.co/9Gwnbvv
 
Last edited:

addison

Distinguished
Apr 10, 2011
621
2
18,995
Almost 10 years ago was the last time I posted a rig update. Here is my current rig, and I am sorry for any dumb posts I made back then, I was a child.

20201105-133919.jpg


Phantek Evolv ITX
Gaming Aura B150
i7 6700k
Fuma 2 with 3 fans
32GB DDR4 2400 MHZ
RTX 3070 Founders Edition (Best Buy just delivered yesterday! I had a 1080 previously.)
500GB Samsung 860 Evo
1TB Crucial NVME (on the back)
3 RGB 120mm fans
750 Watt EVGA G2 PSU
 
  • Like
Reactions: DMAN999

Phaaze88

Titan
Ambassador
I've had it for about 2 weeks now - was doing chassis airflow and cpu thermal tests - Alphacool's Eisbaer Aurora 360.
[Unable to post pics at the moment, because Windows doesn't recognize the phone for some reason. Busted phone USB port? Trying a different cable didn't work either.]
Update: I have pics now.
View: https://i.imgur.com/M9aMLJj.jpg


View: https://i.imgur.com/FlF1mGj.jpg


View: https://i.imgur.com/MuYLAEv.jpg


Replaced the stock fans with 3x NF-F12 Chromax Black, because screw LED fans and round fan frames on rads is dumb.

This unit was a bit trickier to set up compared to the Celsius S36 I have on the gpu. The mounting part was especially troublesome.
The instructions just say to tighten the socket screws by hand, and the screws don't actually stop. Plus, I don't really know my own strength, so I actually caused a couple of cpu errors due to over-tightening.
So I had to take my time, count my turns for each screw, and stop once it 'felt firm'.

The tubing on this unit doesn't feel as flexible to the Celsius S36.

This unit is rated for up to 2800rpm on the pump, but what I failed to notice is that it was for 13.5v DC. My motherboard only does 12v - that I can see anyways.
Maxing the rpm out just gives me ~2400rpm, so I was left wondering if there's significant performance missing here or not. Looking up threads on pump speed tells me there isn't.

As for cooling ability, I don't know whether to be happy or disappointed. I believe my results come down to 'just freakin' Skylake-X'.
I ran both coolers through Prime95, Small FFT, all AVX options off, with a target time of 15mins. Thermal limit set to 90C.
4.3ghz
NH-D15S(dual fan)
2FWCgiR.png
Eisbaer Aurora 360
9QiGRmD.png
4.4ghz
NH-D15S(dual fan), failed
P8uMKwj.png
Eisbaer Aurora 360
5jkaiSz.png
Forget 4.5ghz, I'm nowhere close to being able to push the 4.6ghz bin Silicon Lottery found. Their delid job also appears to be working fine; none of the tests I've done are exceeding 10C between the hottest and coolest cores.

I don't see myself upgrading to either Intel 11th gen nor Ryzen 5000, so now I'm debating whether to fork over another 100USD for a Direct Die Frame + Delid Die Mate X or just roll with the 4.4ghz OC.
That stuff will become useless once I do upgrade, so...
 
Last edited:
  • Like
Reactions: NightHawkRMX
View: https://imgur.com/gbTHNzF


View: https://imgur.com/a285FBb


I think this perhaps is the dumbest system I have made.

This is the ITX PC above but It would not sell so I put it into a "nice" case with some RGB. It was getting some interest but after my RX5700s unexpected death I just stole the GTX1660 from this PC and have been using it.

I found a liquid cooled GTX1080 on eBay for just under 250 with free shipping, so I put that in here. Its an MSI aero 1080 with NZXT bracket and asetek oem 120mm aio with a pretty thick rad.

Its a terrible itx motherboard with low profile Thermaltake cooler plus this massive liquid cooled card. The bracket kind of makes it look like the card is drooping which adds to the stupidness.

Also the Q300L is a BIG mistake. it is just bad in every way.
 
I honestly havent tested that. I will have to get back to you.

It only comes with one fan out of the box. The front and top have a bunch of holes drilled in them for airflow, then mesh over it. nowhere near as good as normal mesh, but id guess still alright
 
The cooling setup is as follows.

Case:
2x120mm upHere RGB intake fans at the front.
1x120mm upHere RGB exhaust fan at the rear.
Plugged into the hub they came with. They run at one speed only. Not too loud.

CPU: Some unknown thermaltake cooler. 80mm perhaps 92mm fan, couldn't be bothered to check. Plugged into PWM cpu port. Audible under load.

GPU: MSI Aero GTX1080 8gb with NZXT AIO bracket and Asetek 120mm AIO. Has a very thick radiator with a scythe 120mm fan. It is mounted in the front behind one of the rgb fans for push pull. The pump, vrm fan, and rad fan is plugged into a sata fan hub which runs full speed all the time. This UTTER GARBAGE h110 has exactly 1 system fan header, and I just found it a better idea to use the hub.

The GPU in furmark bounced between 47-48c after an extended time. I think it's pretty dam impressive that the 1080 is under 50c under an intense furmark load while drawing about 200w according to hwinfo.

Then I fired up aida 64 and ran it side by side with furmark. Gpu went up by basically 1 degree and CPU stayed about 61-62c I ran both tests for 40 minutes at the same time.

Airflow is pretty alright given those results. Makes me wanna get myself a water-cooled GPU.