Trouble Installing Linksys Adapter

[ARUNSHARATH]

I am having trouble installing Linksys dual-band wireless-N USB adopter (model: WUSB600N V2.100). I have a desktop PC windows 7x64. The setup Wizard installs the driver for the adopter but cannot configure the wireless network.
Any help will be appreciated.

Arun

 

[Emerald]

are you using the linksys software?

are you using the latest driver?

http://homesupport.cisco.com/en-us/wireless/lbc/WUSB600N

 

[ARUNSHARATH]

Thanks Emerald. I am using ver. 2.100 linksys software. The setup Wizard installs the driver for the Adopter but is not able to install the adopter.

 

[Emerald]

I would try not to use the Linksys software.

Disconnect the USB NIC, uninstalling the Linksys software, download the latest drivers (3.0.10.0) and extract, connect the NIC and install the drivers.

Hope that will work.

 

[buwish]

The title of this topic has been edited by Buwish

 

[ARUNSHARATH]

I would try not to use the Linksys software.

Disconnect the USB NIC, uninstalling the Linksys software, download the latest drivers (3.0.10.0) and extract, connect the NIC and install the drivers.

Hope that will work.

Thank you very much. The WUSB600N was successfully programmed with the new Linksys driver sw. My PC is up and running on line since then.

 

[ARUNSHARATH]

Thank you very much. The WUSB600N was successfully programmed with the new linksys driver sw. My PC is up and running on line since then.