Unigine Valley 1.0 Benchmark Thread

[RussK1]

I am a bit concerned for the new cards I got. Something is amiss and I aim to get to the bottom of it. 3640 on the 780 sli reference models WITH 150 core/250 memory (temps were fine). My previous score on my 760s was 3350....

Yeah that's low.

Here's mine and I feel this is low.

 

[oOSlushyOo]

I am a bit concerned for the new cards I got. Something is amiss and I aim to get to the bottom of it. 3640 on the 780 sli reference models WITH 150 core/250 memory (temps were fine). My previous score on my 760s was 3350....

Yeah that's low.

Here's mine and I feel this is low.

And that's with only ONE 780?! Man something is seriously wrong with my setup then....

 

[jimthenagual]

Slushy, you have something wrong for sure I'd say. I'm dual 770s at stock clocks, I score around 3800. RussK1, that is a great score for a single card.

 

[RussK1]

I am a bit concerned for the new cards I got. Something is amiss and I aim to get to the bottom of it. 3640 on the 780 sli reference models WITH 150 core/250 memory (temps were fine). My previous score on my 760s was 3350....

Yeah that's low.

Here's mine and I feel this is low.

And that's with only ONE 780?! Man something is seriously wrong with my setup then....

No, it's two.

Look at the EVGA Precision OSD.

 

[RobCrezz]

Amazing score for sli 670s! Good job!

 

[nikoli707]

nikoli707 - 2500k @ 4.4ghz - 780 @ 1325/1650 - 79.1 - 3309

 

[Mirakledba]

Mirakledba - i5 4670k @ 3.4ghz - Sapphire toxic R9 280x 3gb 384bit @ 1150/1600 - 37.8 - 952

Not happy with the results....

 

[jimthenagual]

Both of those screenshots are from the same system, the only difference between these two is two months time. No hardware changes. Trying to figure out why my performance has dropped so dramatically. I have confirmed SLI is enabled. Both runs are using the preset Extreme HD setting. My gpu temps top at 80c, cpu at 60c. For both runs the graphics cards are at stock speeds.

Anyone have any guesses as to what's going on with my system? I'm at a loss.

 

[cst1992]

The minimum FPS has remained the same, just the max. has dropped from 168 to 109. How is that?
@mirakledba try the preset Extreme HD,
yours is a custom preset. Maybe it has lower tesselation than yours.

 

[Mirakledba]

WAIT WAS I RUNNING THE WRONG BENCHMARK? I was doing heaven...am i supposed to do valley????

Jim - Maybe one of the GPU's (If so, might be the first 770 you had) Is losing its power? remove one GPU and try it out, replace it with the other and try that out and see which 770 gets a higher rate and maybe one is just weaker.

 

[jimthenagual]

I'm going to start a new thread so I don't threadjack this one with my own troubleshooting requests.

started it here: http://www.tomshardware.com/answers/id-2041177/troubleshoot-sli-problem.html

 

[Mirakledba]

Mirakledba - i5 4670k @ 3.4ghz - Sapphire toxic R9 280x 3gb 384bit @ 1150/1600 - 44.6/1865

Nice 😀 I ran heaven before thats why I was getting weird numbers...this is valley.

 

[batty251]

i5 3450 , Sapphire 7770 Crossfired .. it was overclocked but i overclocked it a little more 1220/1350

 

[stickg1]

MDBA - Run VALLEY on the Extreme HD Preset! You're using the wrong benchmark on the wrong settings, lol!

 

[batty251]

hmm if u mean me then check the pic again

 

[Mirakledba]

StickG1- I just did. Screen shot 3 posts above. Hows that?

 

[nikoli707]

my 7950 got a best of 1964 on the valley extreme hd setting. that 280x should be able to top 2000.

 

[Mirakledba]

nikoli707 - Is your 7950 OCd? Is your CPU OCd? Mine are all at stock.

 

[nikoli707]

well i don't have my 7950 any more but yeah, my 2500k@4.6 and the 7950@1175core/1575mem.

 

[stickg1]

Two cards I had my mitts on recently and overclocked until artifact/crash. Nothing special, GTX 460 and Radeon HD 7770...

 

[nikoli707]

2500k@4.7ghz --- evga 780 classified@1350mhz core 1650mhz mem 1.212v
3349@80.0fps
[/img]

2500k@4.6ghz --- msi 7950 twin frozr 3@1175mhz core 1575mhz mem 1.25v boost, locked voltage controller.
1961@46.9fps
[/img]

 

[Mirakledba]

So nikoli707 gave me some tweaks and i got a higher score!!

Curious, does that improve general GPU performance in games and such or only in valley? And did we worsen the ..um...how do i say this. The settings? Or did we not cause all we changed was

nder Texture Filtering:
Set Anisotropic Filtering Mode: override Application Settings
Set Anisotropic Filtering Level: 2x
Set Texture Filtering Quality: Perfomance
Set Surface Format Optimizations : Off

 

[stickg1]

It's just to get a higher score. It just forces settings that aren't controlled very effectively by the application. I guess it would give you better performance technically, but you lose some quality.

 

[Mirakledba]

quality in games or just in valley?

 

[Mirakledba]

Also I dont want to threadjack this place...so I have a question if its allowed to post a link here, http://www.tomshardware.com/answers/id-2043197/overclock-intel-4670k.html

If not, a mod can feel free to delete this. I know I wont OC now but In a few weeks I will. Just need to learn more about it. If this isnt allowed, stick, just tell me to edit this.