My system is currently unstable and I'm doing some fault isolation.
It randomly restarts w/o BSOD, but more often "blackscreens" with no restart.
This seems to happen independant of load on system, it can freeze/restart even when idling.
I'm now running Prime95, the "In-place large FFTs (max heat, power consumption)" one.
Using HWmonitor CPU core temp shows a max of 64 celsius, while socket temp shows 45 degrees, the core temp looks pretty high?
I'm using the Corsair H60 watercooler for CPU.
Case temperature is 24 degrees.
Pretty sure I have good airflow in my cabinet with 1 120mm exhaust in the bask and 2x120mm intakes in front, the radiator and fan are mounted right behind the intake fans in front.
It seems to me that CPU theoretically should have pretty decent cooling, why are temps this high?
I used the credit card method on thermal paste (arctic silver 5) to even it out.
And lastly (and a little bit off-topic), can anyone take a glance on my PSU voltages? (XFX Pro series XXX edition 850W) Its been running for an hour and to me voltages seems pretty stable, only concern is that +3.3V showing stabile 3.16V?
It randomly restarts w/o BSOD, but more often "blackscreens" with no restart.
This seems to happen independant of load on system, it can freeze/restart even when idling.
I'm now running Prime95, the "In-place large FFTs (max heat, power consumption)" one.
Using HWmonitor CPU core temp shows a max of 64 celsius, while socket temp shows 45 degrees, the core temp looks pretty high?
I'm using the Corsair H60 watercooler for CPU.
Case temperature is 24 degrees.
Pretty sure I have good airflow in my cabinet with 1 120mm exhaust in the bask and 2x120mm intakes in front, the radiator and fan are mounted right behind the intake fans in front.
It seems to me that CPU theoretically should have pretty decent cooling, why are temps this high?
I used the credit card method on thermal paste (arctic silver 5) to even it out.
And lastly (and a little bit off-topic), can anyone take a glance on my PSU voltages? (XFX Pro series XXX edition 850W) Its been running for an hour and to me voltages seems pretty stable, only concern is that +3.3V showing stabile 3.16V?