Info Upgraded my RAM, now the system wont boot

[Wonderclam]

I decided to upgrade my RAM from 16GB DDR4 to 32GB DDR4 3200

Then my motherboard will not boot. One of the debug led lights up, the bottom one. I can't seem to find it on the manual. The fans all spin, but nothing on the screen.

I decided to put the old RAM back and it worked.

So then I decided to give it another try and put the new RAM in, then it wouldn't boot again. The system will not POST for me to even get in the BIOS

So I put the old RAM back in and now, that doesn't work either.

I made sure to discharge any static on my hands before working on it.

I hope I didn't bork the motherboard.

I had to take out the CPU fan and power connector to the motherboard each time so I could access the RAM slots. I made sure the RAM was seated properly and pushed down on both ends of each of the RAM. I made sure that I was using the same slots as before.

I never moved the case the entire time. It was laying flat during the entire debacle.

 

[Lutfij]

Sig space specs can and will change, it's why we ask users to include their specs in the thread's body. With that being said I see you have an MSI MPG X570 listed in your sig space, is this your board;
https://www.msi.com/Motherboard/MPG-X570-GAMING-PLUS/Specification
?

If so, what BIOS version are you currently on? Got links to both the old and new ram kits?

 

[Wonderclam]

Yeah, that's my motherboard. I still have the original BIOS when I bought the motherboard, I think. I don't remember ever updating it.

The debug LED is "BOOT"
"Indicates the booting device is not detected or fail"

Which I assume is the hard drive? I thought you could still POST even without a hard drive installed.

The new RAM I bought from Amazon:

Corsair VENGEANCE LPX DDR4 RAM 32GB (2x16GB) 3200MHz CL16 Intel XMP 2.0 Computer Memory - Black (CMK32GX4M2E3200C16)​

The old RAM is G. Skill ripjaws, 2 x 8GB. I don't know the exact model.

 

[Roland Of Gilead]

Hey there,

You can use CPU-z and look at the motherboard tab to see which bios revision you are running on the mobo.

Prob best thing to do right now, is a CMOS clear. This will reset the bios completely and hopefully get you booting.

https://forum-en.msi.com/faq/article/printer/how-to-clear-the-cmos

 

[Wonderclam]

I'll try clearing the CMOS. I hope that does it

 

[beyondlogic]

I'll try clearing the CMOS. I hope that does it

you may have to update the bios some of the ram kits from corsair wont work without a bios update

 

[Wonderclam]

I don't understand why now the old ram wont work

I just need this PC to last until the AMD 9000 series comes out in a week or so

 

[Roland Of Gilead]

I don't understand why now the old ram wont work

I just need this PC to last until the AMD 9000 series comes out in a week or so

Well, did you clear CMOS yet? If not, it's likely a crash on the new ram has corrupted the bios. Thus, the older working ram may not work again until you clear CMOS,

 

[Wonderclam]

Well, did you clear CMOS yet? If not, it's likely a crash on the new ram has corrupted the bios. Thus, the older working ram may not work again until you clear CMOS,

I'm at work right now, I'll try when I get home.