ttopp300

Distinguished
Jul 17, 2010
4
0
18,510
Hello,
I am tryuing to do a fresh install on a system that was working perfectly fine until I turned it on a couple of weeks ago. I continue to get error message one after another. I found most of my support in Techguys but noe i'm getting the initial message again, "No Emulation". I don't know if this is a problem or not except now after the Vista initial screen, it freezes. I have formatted my drive, removed extra memory, audio card, modem. Its an older computer but is basically in good shape. Could it be a virus?
 

GunBladeType-T

Distinguished
Jul 8, 2010
553
0
19,010



I would only keep the video card in your system and boot in safe mode f-8 and see if anything is conflicted! Than I would install your Gpu drivers and install components 1 by 1 such as the modem than the sound card! If your computer still hangs try f-8 again and choose good known configuration. If you have like a AMI Check it Diagnostics software I would try running it to see whats going on with your system through the floppy or usb drive!
 

ttopp300

Distinguished
Jul 17, 2010
4
0
18,510
I guess I should have mentioned I'm using windows vista 32. DO I just replace the 64 with 32? I cannot get into Vista and don't know if it's still accessible since I formatted the drive. I did run "Kill" once to reverse it but that didn't help. I still couldn't get into safe mode. It seems I'm getting a new message everytime I fix the present message. These are some: Driver is mismanaging sys.PTES code 0x80070570; REc Env.exe-Application Error The instruction at 0x753ed6c2 reference memory could not be read. Click ok to terminate the program. Access violation at 0x689020E2 (tried to read from 0x00000004) program terminated. and others.
 

ttopp300

Distinguished
Jul 17, 2010
4
0
18,510


I have already tried to do the startup repair but I recieved an error message for that also. I think it was the "Rec Env.exe
-Application Error The instruction at 0x753ed6c2 reference memory could not be read. Click ok to terminate the program. Access violation at 0x689020E2 (tried to read from 0x00000004) program terminated.
 

tapti

Distinguished
Aug 4, 2010
2
0
18,510
Hello...

I don't know if this is a problem or not except now after ...


I am tryuing to do a fresh install on a system that was working perfectly fine until

I turned it on a couple of weeks ago. I continue to get error message one after another. I found most of my support in Techguys but noe i'm getting the initial message again, "No Emulation".


=====================================================
Thanks!!!

========================

"Want to get-on Google's first page and loads of traffic to your website?
Hire a SEO Specialist from Ocean Groups seo pecialist "