So, there are three hard drive on my PC the first one is my SSD as my boot device and the other two of them are 1tb and 500gb WD blue hard disk. If I only plug the SSD it worked, it POST and I can get into the bios. But if I plugged the other 2 hard drive it just running but no display. On my PSU there are two sata cable lines, if I use the second sata cable the PC doesn’t POST at all. But if I use the first sata cable it work, it can POST. Basically, if I plug my hard drive into the other sata line it won't work but if I use one sata line it works.
Please take a look the picture I made so you can understand what I mean
View: https://imgur.com/a/yEAkyXc
PSU : Aerocool Lux 550W
Please take a look the picture I made so you can understand what I mean
View: https://imgur.com/a/yEAkyXc
PSU : Aerocool Lux 550W