I did this and nothing has changed it still freezes at the same point, I can tell it installed Windows because it refers to my hard drive as, "windows boot manager (ST2000DM008-2FR102)"
Try the BIOS update
But you might want to try it as a first step unplugging my hard drive, booting up without it, and then turning off and plugging it back.
-------------------------------------------------------------------------------------------------------------
Just unplugged it and hold down the power button to discharge built up static
Power resetting your PC can clear all the information in the memory, but this won't damage the disk data. This method could help fix certain corruption issues on the computer.
Therefore, power resetting your Windows might fix the getting Windows ready stuck issue.
Step 1: Turn off your PC by pressing the power button.
Step 2: Disconnect all peripheral devices including USB flash drives, external hard drives, earphones, etc. Also, unplug the power cable or adapter from your PC.
Step 3: If you are using a laptop and the battery is detachable, remove the battery from the battery compartment.
Step 4: Press and hold the
Power button on your computer for about 30 seconds to drain all the remnant charge from the capacitors.
Step 5: Connect the power cable back to the PC or insert the battery into your laptop. However, don not re-plug any of the USB devices.
Step 6: Press the Power button to boot your PC. You can now check whether the Windows 10 stuck in loop getting Windows ready issue is solved.
or
How to Reset PC BIOS/CMOS