[SOLVED] Why is my GPU not performing

[egoego]

So yesterday I did a fresh install for Windows 10, I formatted my 2 drives and everything was working normally. My frames were right in the 2 games I was testing (Super People and Minecraft). I got a few frame drops but didn't mind it since I hadn't updated my drivers. After I had downloaded and installed my drivers through GeForce Experience, it all went back to how bad my pc originally was. (I had reinstalled Windows since I didn't know what to do with my PC as it wasn't even running Minecraft correctly). Down below you can see some screenshots as how it's performing monitoring playing Super People on the same settings as yesterday (Very low). And I'll add in a screenshot from LatencyMon 7.20 since in another post on here with the same issue that was recommended. Please help since I don't know what to do anymore. Also below will be my PC specs.

gpu load

latencymon (click on image)


CPU: AMD Ryzen 7 3700X
GPU: NVIDIA GeForce 1050 Ti
Motherboard: GIGABYTE X570 GAMING X
RAM: 2x G.Skill F4-3200C16-8GVKB DDR4
SSD: Samsung SSD 860 EVO 500gb
HDD: WDC W10EZEX-00WN4A0

 

[egoego]

side note: before the fresh windows install it was the exact same

 

[alceryes]

Don't use GeForce experience - just install the most recent drivers.
Make sure you install chipset drivers too.
After driver install verify GeForce settings are where you want them.

Run and post your Userbenchmark and Time Spy results.

 

[egoego]

Don't use GeForce experience - just install the most recent drivers.
Make sure you install chipset drivers too.
After driver install verify GeForce settings are where you want them.

Run and post your Userbenchmark and Time Spy results.

https://www.userbenchmark.com/UserRun/49040719

I scored 2 610 in Time Spy

AMD Ryzen 7 3700X, NVIDIA GeForce GTX 1050 Ti x 1, 16384 MB, 64-bit Windows 10}

www.3dmark.com

did what you said above it hasn't improved

 

[alceryes]

Your memory is running at the default speed. What was it running at before?
You need to get it up to 3200MHz, ideally. Minimum 2933.