Will CM Hyper 212 fit in InWin Dragonslayer matx

[elias_fj]

My wife bought me an "InWin Dragonslayer matx" case to kickstart my gaming rig. I'm building around an intel core i5 2500k and possibly an Asus AP8H61-MLX mobo with 4GB G.Skill Ripjaws 1333 kit. I plan to overclock to 4Ghz. I'm not too sure about the stock heatsink so I wanna replace it with a CM Hyper 212. Will it fit in my case?

 

[COLGeek]

The Hyper 212+ is approximately 6.25 inches tall. Your case is 7.7 inches wide. It should fit. Good luck!

 

[saint19]

The Hyper 212+ is approximately 6.25 inches tall. Your case is 7.7 inches wide. It should fit. Good luck!

Agree on this BUT always that your case don't have a side fan.

 

[Motopsychojdn]

Thank her,
take it back and get the Dragon Rider, much more room for your gaming/clocking desires hehe
Moto

 

[COLGeek]

Agree on this BUT always that your case don't have a side fan.

Agreed, do not install a side fan. Otherwise, it will not fit and you shouldn't need a side fan any way.

 

[elias_fj]

Thank her,
take it back and get the Dragon Rider, much more room for your gaming/clocking desires hehe
Moto

If only it were that easy...the store only had this in stock and its about as good as I can get...I live in Fiji...components hard to get and expensive if u can get them locally...FJ$630 for i5 2500k!! lol!

 

[elias_fj]

Agreed, do not install a side fan. Otherwise, it will not fit and you shouldn't need a side fan any way.

Thanx...I wasnt planning on putting in sidefan anyways....well i'm glad it'll fit coz its a good heatsink and cheapest i can find here Thanx for your help!

 

[elias_fj]

Best answer selected by elias_fj.

 

[Mousemonkey]

This topic has been closed by Mousemonkey