Question Will nitrile gloves protect you from electric shock while working on power supply?

[reaper89971]

Will these gloves protect you from 110v or 120v. Just need some gloves to work on a power supply safely without getting shocked.
https://www.amazon.com/dp/B0C3SH8MBX?ref=ppx_yo2ov_dt_b_fed_asin_title

 

[rgd1101]

what exactly are you doing with power supply?

 

[reaper89971]

what exactly are you doing with power supply?

I have to solder in a AC input plug and solder in a 2 pin fan? Its a Mean Well LOP-500-27.

 

[reaper89971]

That is my power source for my HDPLEX DC-ATX 500watt power supply

 

[CelicaGT]

No.

(Edit: to add) Also NEVER work on a live system, more people die from 120/110VAC than any other voltage. If you have to ask these questions I do not advise you do the work without familiarizing yourself with electrical safe work practices. You could harm yourself or others inadvertently.

I am an electrician. No, I will not advise further.

 

[ex_bubblehead]

Rubber NOT nitrile.

 

[reaper89971]

No.

Are there thin glove that protect from electric shock

 

[reaper89971]

Need some thin flexible gloves i could easily hand solder with.

 

[ex_bubblehead]

This is a question that if you have to ask you are most definitely NOT qualified to do the work and possibly risk your life here.

 

[reaper89971]

This is a question that if you have to ask you are most definitely NOT qualified to do the work and possibly risk your life here.

hand soldering isn't risking your life.

 

[reaper89971]

This is a question that if you have to ask you are most definitely NOT qualified to do the work and possibly risk your life here.

Well then expert what gloves do you use for soldering?

 

[Gururu]

They are non conductive and would provide some protection. Are you worried about a shock after performing the soldering?

 

[reaper89971]

They are non conductive and would provide some protection. Are you worried about a shock after performing the soldering?

Just during i don't want accidently touch anything i shouldn't on the power supply. Im not perfect,Just got to solder in an AC PLUG and solder in a fan or fan plug. Most likely im going to soldering in a 2 pin fan. I already pulled the solder out of the holes.

But was just wondering what gloves would work best. What do the pros who do solder rework use?