Question wiring question on aio

[willie91k]

I have a

Deepcool LS 720 Aio MSI B850 edge Ti wifi motherboard and an Antec C5 case with the hub. My question is on the second picture down does the top wire plug in some were or do i not use it because of the x they show that says auto RGB ? 65 years old and got the bright idea i could build a pc what an idea. Any way thanks for the help!!

 

[punkncat]

That upper male plug is to continue on to other ARGB devices, if installed and of that pinout.

 

[willie91k]

So do i have to plug in the female part of it to the motherboard?
Thank you for the help

 

[punkncat]

Yes, if you have the 3 pin ARGB on the mobo.

 

[willie91k]

thanks!!

 

[Paperdoc]

You will have noted that each fan has two cables or sockets - one for the fan, and one for its lights. In each case the design has TWO connectors or sockets involved so that you can connect one fan to another in a "daisy chain" in which only the FIRST fan of the chain plugs into a mobo header (fan motor or 3-pin ARGB header). This allows you to "use up" only one mobo header of each type for ALL the fans in this AIO setup.