Hi, I bought a new XFX 7950 CORE EDITION, this both happens with 13.1 and 13.2 Beta updates of Catalyst. I measure using GPU Sark 0.5.4.
On IDLE, according to catalyst, it is with 0% activity, 300Mhz clock, 150Mhz mem clock, energy 0%, fan 20% and TEMP 44ºC
The temperature in the room is'nt higher than 23ºC - 30ºC
In Catalyst, it's set at 900MHz (I didn't change the configuration) core clock.
Everything like that, runing FURMARK, runs into 100ºC .. I stoped it before ending the test for obvious reasons...
If I manually set the FAN to 100%, it then reaches 89ºC
Something similar happens in Far Cry 3, reaching easily 90ºC ingame load.
In Crysis 3, all maxed out, with 100% FAN manually fixed, gets to 84ºC ingame.
I have a case Aerocool Strike-x one advance , and a fx8350 , I bought everything 2 weeks ago, dust can't be the problem.
Is the Card OK or is it too hot for being a 7950? I'm seing people with 25 .. 30º IDLE and 60 load temps . . . thanks
On IDLE, according to catalyst, it is with 0% activity, 300Mhz clock, 150Mhz mem clock, energy 0%, fan 20% and TEMP 44ºC
The temperature in the room is'nt higher than 23ºC - 30ºC
In Catalyst, it's set at 900MHz (I didn't change the configuration) core clock.
Everything like that, runing FURMARK, runs into 100ºC .. I stoped it before ending the test for obvious reasons...
If I manually set the FAN to 100%, it then reaches 89ºC
Something similar happens in Far Cry 3, reaching easily 90ºC ingame load.
In Crysis 3, all maxed out, with 100% FAN manually fixed, gets to 84ºC ingame.
I have a case Aerocool Strike-x one advance , and a fx8350 , I bought everything 2 weeks ago, dust can't be the problem.
Is the Card OK or is it too hot for being a 7950? I'm seing people with 25 .. 30º IDLE and 60 load temps . . . thanks