Question how to connect regular Psu to HP 705 G4 MT

[Amyra4567]

Hello, I would like to know if anybody can connect the regular PSU on the HP 705 G4.
since the HP PSU had 2 x 4-pin 12V power and 7-pin Pwr command
it would be something Like this?

I recently bought Coolermaster V750 SFX and where the cable that I connected to it

well, Let me know if you know the Diagram of this "power command" connector

https://imgur.com/Lc1OsaU

https://imgur.com/dA9Nq3L

 

[Lutfij]

Welcome to the forums, newcomer!

I would advise against trying to make your prebuilt run beyond spec. There are no adapters that will adapt an SFX/ATX PSU to that 7pin connection on the motherboard, per my search.

 

[Amyra4567]

Welcome to the forums, newcomer!

I would advise against trying to make your prebuilt run beyond spec. There are no adapters that will adapt an SFX/ATX PSU to that 7pin connection on the motherboard, per my search.

I see well I need to know about the pinouts of this connector
and make it myself that's all

 

[thestryker]

There's not a whole lot of good information out there, but this seems like it might be applicable:

View: https://www.youtube.com/watch?v=fXmLxYBcAl4

 

[Amyra4567]

https://imgur.com/wTRmtlQ

I found the pinout on a Chinese forum
where should I connect to the 24-pin connector?

and what should I do?