aio cooler installation

Hello all, I am doing a major revamp of my pc and I got pretty much all of it from a friend so I dont know mich of what I'm doing. I'm going to be using the NZXT H7 Flow (2022) as my case with an NZXT Kraken Elite 360mm AIO for a R7 7800x3d. With the extra case fans I bought there will be...

hey all, I'm using an AIO with 3 fans and a waterblock. It came with a hub for the fan power cables, which are connected and working, as is the waterblock's power. The RGB wires for the fans and the block didn't come with a hub, so they're daisy chained together and then connected to the...

Hi, I'm considering building a new PC since mine is getting old and was bad even when i built it. I want to build it in the NZXT H6 Flow case and since I'm somewhat building a budget build (ryzen 5 7600x + rx 7800 xt) and want to use an AiO that isn't insanely expensive. Since there's been much...

Hello ! A relative of mine has an old Dell t3600 precision workstation and I want to know what cooler can I use instead of the OEM dell cpu cooler I saw lots of guides about moding a noctua cooler to fit into the screws holes ( ILM mount or something ) , and about the Dell s aio that was used on...

Hello! Recently, I assembled a new computer and encountered a dilemma regarding the placement of my water cooling solution. The only viable location for my setup seems to be at the bottom of the case. However, after conducting some research online, I came across several warnings suggesting that...

Hey everyone, I'm here again with an age old debate of while front mounting an AIO the tubes should be up or down. I've recently bought Deepcool LS520 and mounted it to the front with tubes facing downwards. I showed the images to a friend and he told me to mount it the other way around. I've...

I'm trying to fit the AIO controller into my case however I can't really find any space for it, except for the backplate on the motherboard behind the CPU. is it safe to install it there? I would upload a picture but it appears as though you're not allowed to upload pictures from your computer...

Hello, i am going to build a new pc. Here are the specs: CASE: NZXT H5 Flow MB: ASUS TUF GAMING Z790-PLUS WIFI soc 1700 DDR5 Z790 ATX 90 CPU: Intel Core i7-13700K CPU cooler: NZXT Kraken X53 RGB or NZXT Kraken X63 RGB? GPU: ASUS TUF Gaming GeForce RTX 4080 16GB OC Edition RAM: Kingston FURY...

Hello! I have a Kraken x63 AIO and it's stuck at 700 rpm. Can't change it. please help!

Hello world, I have a problem and I wanted to know if someone can help me, right now I have an MSI B360M BAZOOKA motherboard which does not have the PUMP_Fan connector and I wanted to know if there is any problem connecting a Cooler Master MasterLiquid ML360R, in some of the Sys_Fan connectors...

View: https://imgur.com/c0NgmUo As you can see from GamersNexus recent project and video -- they suggested to have the tubes below instead of the top. Would it really make a difference? He didn't mention any temps but only that it eliminates air bubbles. I have a 360mm on its way and now I'm...

So I have a NZXT h440 razor edition (Bought it used. I would never pay more for a Razor logo :D) So I've heard so many different things for set ups. -Right now I have 3 intake fans at front of case. -1 rear fan. -240mm Corsair AIO at top of case. With the fans pushing air out. I've been...

Hi my pc sits horizontaly and is a pain to get the motherboard out off I am getting a aio Cooler and I have read that the backplate supports the motherboard but if mine is laying down would I need that extra support?

Hi! I had never installed a AIO cooler and this is my first so forgive me if I am asking silly questions. I want to replace my CPU cooler to a AIO cooler on my old PC. My old PC is using ASRock Fatal1ty H87 Performance and the cooler that I am interested in is Cooler Master Master Liquid ML240R...