argb

Greetings all! I’m delving into ARGB for the first time, building a PC for my nephew and have a question re: how many fans I can daisy chain off one ARGB connector. The motherboard I’m using for the build, the Asus ROG Strix B550-F Gaming, has 1 ARGB header and the fans I’m using are the...

Hey guys, I wanted to connect all my RGB components either to my motherboard or my Cooler Master controller to sync it all but the RGB fans on my case don't have the typical RGB fan connector, instead they have this connector shown in the picture. What type of connector is it? And what type of...

Hi I have recently bought a case and the RGB remote worked as usual, but then I have tried changing the FAN lights with software and then I have learned that there are RGB headers on the motherboard because it was my first time building a PC with RGB fans and I have tried looking for the typical...

Im new to building with rgb lighting and I’ve got the following parts that have aRGB: 3x Light Wings 140mm highspeed 1x Dark Rock elite 1x Asus Rog Strix 4080 Super (Unsure if this has a separate aRGB cable) Technically the case (Dark Base 701) has it too but it has its own connection already...

Hello! I have a plan to set my ARGB fans here and I’d like some opinion/confirmation that it makes sense. First, here’s what I’m using Case: NZXT H6 Flow Mobo: MSI MAG B760M Mortar Wifi II. The JARGB_V2 connectors allow you to connect the ARGB Gen2 and the ARGB-basedLED strips. The JARGB_V2...

So I have had Corsair fans for 9 months and today 6 on 1 case fan hub have stop changing RGB colour. They’re still spinning and the light is just white they’re not even being detected on icue. Any ideas ?

Hi, I would like to get 6 such fans for my case: https://www.arctic.de/en/P12-PWM-PST-A-RGB/ACFAN00231A Current/Voltage: 0.4 A | 5 V My motherboard has 2 ARGB (JRainbow) headers. According to the manual: "The JRAINBOW connector supports up to 75 LEDs WS2812B Individually Addressable RGB LED...

Hello I currently have 4 fans on my case that are connected to an rgb controller hub, and 3 fans on my AIO radiator. I'm buying a new case which can take up to 10 fans total so i bought an additional 3 fans. All the case fans are 3-pin 5V ARGB fans + the ARGB aio. I would like to stop using the...

I recently purchased a Fractal Air Pop case. One of its features is a colored button that lights up in line with the fans. The problem is that I ordered the case in green color, and the built-in (programmed) modes do not have a static green ARGB color. My question is, is it possible to program...

All of my case fans and my AIO cooler's radiator fans and CPU block are connected to my ARGB fan hub which came with my case (MSI Mag Forge 112R). There is no issue with the RGB on my components but rather with the power cable for the hub itself. While the PC is running, if I take out the power...

I bought a used NZXT F140 RGB case fan from Amazon last week. After installing it, I noticed that the RGB pattern on the fan stuttered and flickered. I did some research online, but I could not find anything that explained why there would be a flicker. Here are some important things to note...

I recently bought case COUGAR DUO FACE PRO RGB which has 4 argb fans (3pin+argb connectors) in it and they are all connected into argb hub splitter, so all 4 fans + lighting "COUGAR" argb sign are pluged in the argb hub splitter which has 2 small additional wires 1...

I have a question about the title-mentioned GPU. I wanted to buy it for myself, but I gave up when I realized it has a external 5v 3pin ARGB Sync cable that needs to be connected to your motherboard - and my motherboard doesn't have those headers. I asked on multiple subreddits if the GPU's...

Hi guys so the question is: Can i connect 4 argb devices in one header 3 of them are artic p12 argb fans they have 0.4A, so its 1.2A And fourth one is deepcool lt720 pump argb, i cannot find its amperage on their website Is it safe to connect in one argb header (second header on mobo is taken...

Hiya folks, I've been eyeballing the LT100 lighting towers for a while now, to spice up my setup a bit. Two towers is a bit too much for me however, since that won't really fit on my desk. I do allready have the ST100 RGB headset stand, so only one tower would be enough: ST100 on the right of...

Title is quite chaotic so let me explain I have 7 Arctic P14 ARGB fans, and all of them daisy-chained connected to one slot would require 2,8A (per one fan - 0,4A / 5V / 12 LEDs) My MOBO states, that one (ADD GEN2_X) connector has the max rating of 3,0A / 5V / 500 LEDs So the LED requirement...

Hey! How do I connect the argb switch button on the case to the fans on the deepcool cc560 case? like when i press the button the color on the fans should change

I have a 1st gen ryzen specifically Ryzen 7 1800X, a Asus TUF B450M Plus II and CM Masterfan MF120 Halo. I was thinking of are there any B550 motherboards who could support a 1st gen ryzen CPU that also have ARGB header in it? I'm having problems with fan leds and I think its because of the...

Hey everyone! I can't seem to find a straight answer on the internet anywhere. I have an RGB splitter cable 1-6. It is Female to female but with 6, 4 pin adapters to plug in to make the 6 splits male. My waterblocks are argb (3pin) female so there is a blanked out connection stopping the...

Hi there, I got a Lian Li Lancool II Mesh RGB (which came with 3 RGB fans), a Galahad 360 Aio and the Lian Li RGB strip especially made for this case. They are all connected to the 2 argb headers on my Z690 AORUS Master. My AIO is mounted at the front and the 3 fans' rgb cables are connected...

Hey, guys, I was wondering how my case running 2 argb fans i can change colors and modes from the led button while my mobo doesn’t support argb headers and if I can add another argb fan and control it from the Led Button my case : raidmax x902 mobo : A320 m2h

These are the fans in question. They're SP120's that came with a hub kit with a controller. The hub and controller are SATA powered and do not go into ARGB headers. As you can see the fans' RGB connectors are different as they belong in the hub itself. What I'm wondering is if the 4-pin...

Hi, I'm building a new pc and I want to use 3 intake (front panel) fans, 1 exhaust and 3 fan (360IO coolers) exhaust fans. I want to use Arctic P12 aRGB fans for my build. My motherboard will be B760 AORUS MASTER DDR4 I've read a few articles about daisy channeling more than 3 fans at once...

Greetings, Firstly, apologies if I posted in the wrong topic thread, I'm not really sure where to post this issue I'm having. Anyways, I have a Galahad 360 RGB AIO from Lian Li, now I wish to control the rgb lighting through software, the problem is...the AIO model I bought is not the ARGB...

Hi, Ive got the MSI Z390 - A Pro and I need some help as I'm finding it difficult to understand when it comes to ARGB. Ive bought the following: Corsair Commander Pro core XT Corsair H100i RGB Pro XT AIO Corsair LL120 RGB fans. (3Pack) I understand that my motherboard has 12V rgb header...

Long time reader, first time poster. I've been building PCs since pre 286 days. I bought a 4090 and to accommodate it, I bought a PCIe 5.0 power supply (Thermaltake Toughpower GF3 Gold 1350W) so I didn't have to use the 16-4X8 pin adapter. I have the Thermaltake L20 GT case which has a fan...

My Motherboard Model: Asus B660M-PLUS WIFI DDR4 My Cabinet Model: Lian Li Lancool 215 My AIO Liquid Cooler Model: Lian Li Galahad 240 ARGB As you can see by my motherboard specs, it has 3 ARGB Gen 2 headers. Yet only 1 ARGB header seems to be working correctly. When I connect my case fans or...

Hi Everyone. I just can't find what fans should I buy for my PC. I got a Cougar Darkblader X7 for my build and I don't know what fans can fit in the fan-ARGB panel already installed in the case. . https://cougargaming.com/products/cases/darkblader-x7/ Here you can see the little fan ARGB...

Hello, I Built a PC for myself recently. The PC Case is a Cooler Master H500 Mesh btw. So when i put it together everything, i plugged the fans and the led strips into an argb hub (Phanteks), I turned it on for the first time and I heard a sparkling sound from the psu, turns out when i plugged...

Hello People :) Lately i purchased 3x Masterfan 120 Halo from Coolermaster which came with an ARGB Controller. (Please check the images). Unfortunately later i got informed that my Motherboard ( DS3H B450M rev.1) doesn't have ARGB header. My questions are: Will there be any damage if i connect...

I lately build my own pc using the kolink inspire 11 case, which comes with an umbra ARGB fan. i have a msi b550 gaming plus motherboard. i plugged the fan into sys_fan slot and the jrgb slot and while the fan spins the rgb part doesn't work, i don't think that the power supply is the problem...

I recently purchased a pack of 4 Cooler Master MF120 halo fans and 1 seperate one. The pack of 3 came with a controller. I hooked everything up and the fans all run fine and light up. But the controller is not detected by any software (icue, armory crate, aurasync, etc.) I downloaded the Master+...

hey guys so I dont have an ARGB header on my motherboard but i have an ARGB CPU cooler so what i was wondering was can i connect the argb fan header on my cpu cooler to the argb light strip header on my fan controller ? Your help will really be appreciated thanks.

As the title says, I want to have 9 ARGB Fans working along with the pump argb display, synchronized together controlled by software. For the specs I have: Case: Lian Li O11 Dynamic MoBo: ASUS Prime x570 Pro AIO: Lian Li Galahad 360 ARGB Fans: 6 Cooler Master MF120 Prismatic, 3 included...

I have a GIGABYTE Z370 AORUS GAMING mobo and a Thermaltake Full ATX case. I've used these same 3 x ARGB fans on the same case but different mobo (MSI) and they work just fine. With my Asus mobo, the fans turn on but will not give me RBG lights. I even took one of the fans out and daisy chained...

I have ASUS Z97-A motherboard (https://www.asus.com/ar/Motherboards-Components/Motherboards/Others/Z97A/techspec/) I want to change my stock cooler of the cpu with HYPER 212 ARGB (https://http2.mlstatic.com/D_NQ_NP_615342-MLA48099947739_112021-O.webp this one)...

My motherboard( ASUS Z170 PRO GAMING ) doesn't have an RGB header. I have bought Antec Prizm Cooling Matrix which comes with a controller then I bought Antec Prizm 120 ARGB Case fan and this fan was working fine with the controller. But then I bought Cooler Master MF120 S3 but it's light not...

I have a XPG starkar cabinet. I have daisy chained 2 cooler master sickleflow ARGB fan (of my hyper 212 turbo cpu cooler), one xpg vento ARGB fan(pre-installed in case) and two led strips of the case itself are connected internally. How many more components can I daisy chain without frying...

Hello, I've recently bought some new fans for my pc, and while when there were only 3 it was almost silent, now with 6 fans running at full speed all the time, it's like a ventilator in the room. The thing is, my fans are argb from Aigo Darkflash and they connect to Aigos included hub, which in...

Hey people so a few weeks ago i purchased two id coolings TF-12025 ARGB fans to put in my nzxt s340 case. I had to buy an argb splitter cable from cooler master to install them directly to the motherboard and when i installed them it worked fine, giving full argb lighting and spining correctly...