fan speed control

Hello, I have a Lenovo Y50-70 laptop which has a problem with how fast it heats up. To combat this I used new thermal paste (a decent brand I tried before) and I clean it regularly but it has an issue with how the fans' speed slow down at unsuitable heat degrees for the cpu so I used replica...

Running a A5000 with an ROG Zenith Xtreme X399 MOBO and AMD Threadripper CPU. A GPU intensive application I am using utlizes 100% of my GPU and constantly drives the GPU temsp up to 90c. I've noticed my fan speed doesn't change when this happens. I assume because fan speed is mapped to CPU...

If i connect this fan hub to the system fan header, will all case fans with 3 pins connected to it rotate at maximum speed, or will my system control the speed like shown here?

Hello, I've recently bought some new fans for my pc, and while when there were only 3 it was almost silent, now with 6 fans running at full speed all the time, it's like a ventilator in the room. The thing is, my fans are argb from Aigo Darkflash and they connect to Aigos included hub, which in...

So i've been trying to lower my gpu temps lately cuz they're going pretty high and i found a program which is called FanControl on github. It works perfectly and my fans don't make that much sound so i don't care about high speeds but I'm not sure if i keep them running on ~70%-100% constantly...

Hey so I bought the Corsair SPEC-DELTA RGB case which comes with 4 fans, 3 of which are RGB. All 4 fans use 3 pin connections. The problem is, my mobo is the B450M PRO-M2 MAX which only has one SYS_FAN fan header. So using splitter isn't really an option as the power usage would likely be too...

I have swapped the fans on my asus gtx 760 dcu ii with noctua nf-b9 redux. To retain proper pwm control directly from gpu, they are wired to original plug. The original fans ran at a max of around 3000rpm and 700mA combined, the noctuas run at 1600rpm and 200mA combined. Now msi afterburner...

Hello, I have a question about the fans always being on the lowest setting set by the BIOS. I want to give as much information as possible so I can get the best possible answer, so here it goes: My motherboard doesn't have a dedicated AIO_PUMP connector, so at the beginning I connected the 3...

My 3 Molex chassis fans are "daisy chained" and connected directly to the PSU, making them run at 12v, full speed and very loud all the time... my Asus Prime B450M-A has a CHA_FAN2 empty connector right over the CPU_FAN connector, if i get a Molex to 3-pin cable can i connect them all on the...

Here’s my parts: - MSI Meg ace mobo -5900x Ryzen 9 evga ftw3 3090 1000w evga psu tridentz royal 4000 32gb I just turn it on and it starts to rise. I can finish windows install because of it. I go into the bios and put all the fans on max and it sits at 83c. Idk what to do I’m new to building...

RTX 2060 6gb my card fan speed goes up and down every minute or so. here is a NZXT cam - NZXT cam https://paste.pics/ac191b0c67a5d8cdf9bbbe03c7b06de5 how can i change that it goes from 0Rpm to 1400Rpm on idle(online school)

i bought a ZX-H61c motherboard (https://ibb.co/NY6R8jx) and i cant find the setting for the CPU fan, i get 99c while playing and 35-55c on idle, i tried multiple softwarez like SpeedFan and they couldn't detect the fan i was looking for hidden menus but couldn't find any tips on how to do so or...

Hello, This is my first post so pls. correct me if I posted in the wrong section :). That being said... I have an RTX 2080 TI (windforce). Everything works more or less ok. I have a problem at ~81 celsius -> coolers go from 0 to hero despite my aorus engine settings. Below is a print of the...

I recently built my first PC Decided to add some extra fans, but they are running at minimum rpm all the time. It barely feels like they are doing anything... They don't show up on bios or speed fan. And the software controller does not have a speed setting.... MB:MSI Tomahawk b450...

I just finished building my new rig. Running the following: Thermaltake V200 Mid-Tower case with 3 120mm fans in the front and one 120mm Rear Fan. Ryzen 7 3800x cooled by a wraith prism. MSI MPG X570 motherboard MSI Twin Frozr 7 Geforce Rtx 2070 Super Corsair Vengeance 32 GB, 3200 mhz First...

Hi guys, As it is shown on the title, a month ago, I bought a new gpu an AMD RX580 gigabyte version 8gb, however when I play any game the temperature goes up to 75C, almost everytime, and when I took a look at the fan speed while it is on automatic, I found it working with only 30-35%, so I...

Hi there, I have a Asus P8H61-M LE/USB3 with a Corsair H60 connected. The radiator fan is connected to the Chassis port and the pump connected to the CPU motherboard port, as states in the H60 installation guide. However, the radiator fan seems to be on full constantly, which is noisy. I've...

Hello everyone, I bought a NITRO + RX 590 Special Edition, i'm waiting for my 650W PSU, so I have decided to test it on my friend's PC. His specs are: i3 6100 PSU 550W 80+ Black (Deep Cool) Mini ITX Asus H110 8GB (2x4) DDR 4 The card worked well, the fans were not kicking at Idle. Then we...

I recently uninstalled AISuite, which I used exclusively for fan speed control via Fan Xpert. It allowed me to make my 3-pin fans much quieter than what I'm getting now that I am using BIOS alone. In the BIOS, the lowest I can go is 60% fan speed. If I switch to PWM mode from DC mode, some of...

So my Graphics card a GTX 1050 Ti Zotac 4Gb has been making noise, not clicking noise, not coil whine noise, just hard working Fans with high RPM, which its annoying when idle, becuase its still running at 45% fan speed, and its BIOS locked at 45%, MSI Afterburner doesn't go below 45%, ZOTAC...