NOPOST

Forum discussion tagged with NOPOST.
  1. cuddlyShambler

    Question Random PC "Death"

    Hi everyone I ran into a pretty bad problem with my PC. I cannot even get it to POST anymore. A few days ago i was just using it normally and all of the sudden, the PC cuts its own power and since then i cannot get to start again. The system is bit old yes, but i took good care of it over the...
  2. C

    Question New PC stopped posting

    Hi! I built my first PC yesterday with the following specs: - CPU: Ryzen 7 7800X3D - Motherboard: MSI MAG B650 TOMAHAWK WIFI - RAM: Corsair Vengeance RGB DDR5 2x16GB (CMH32GX5M2B6000Z30K) - SSD: Samsung 990 Pro 2TB - PSU: Corsair RM850e - CPU Cooler: NZXT Kraken 240 Everything worked fine when...
  3. Rainylvl

    Question Pc wont post and power off does not work

    Hi I have recently built a new pc, but when I tried to boot it, nothing displayed on the monitor, but all the fans and rgb turned on, and when I tried to turn the pc off it stayed on and I had to switch off the psu. No motherboard debug lights turned on. Motherboard: asus rog strix b550a Cpu...
  4. S

    [SOLVED] RTX 4080 underperforming, and system only boots one out of five times ?

    Hey all! A couple days ago I said screw it, and bought all new components as my pc was outdated.. however since putting it together I've had nothing but issues. The first issue is only one out of five times the PC will boot, each time it doesn't post I get 1 long 3 short beeps with the VGA...
  5. garak0410

    [SOLVED] No Fan Spin / No POST

    I searched previous articles on here about NO POST for new Motherboards but I cannot seem to find the problem. I am building a system for my daughter...first time in over 10 years that I built one because I just got burned out of it and now I see why. I have a ASUS TUF GAMING Z590-PLUS LGA...
  6. D

    Question No display and No post

    I have a server PC with an ASRock z77 pro3 motherboard. I've been having problems with this PC since the beginning but don't exactly know why. It's got a Corsair 750watt PSU in it and a non-lhr 3060. I probably reflashed hiveOS on its SSD at least 15 times over the past few days but made sure to...
  7. B

    Question New ASUS Z690 hangs on restart

    New build using ASUS ProArt Z690. No post when exiting the BIOS with or without saving. When in the BIOS fans are running at minimum RPM, when hung before post fans run at around 50%, drop like it it going to post, then ramp up again (endless cycle). Despite the problem decided to try and...
  8. sonaf

    [SOLVED] New PSU sparked and now I dont get any display

    I have had this setup for over a year, and I recently upgraded my GPU. I also bought a better CPU and more RAM aswell as a new PSU. Today I put in the RAM, changed the CPU and changed my PSU. When I connected the PSU and switched it on, I saw a flash, probably a spark, from inside the PSU. All...
  9. T

    Question New PC does not display until it is booted into windows

    parts list: Msi B550 A-Pro (5000 series ready) AMD 5600x MSI Rx580 8gb Corsair Vengeance RGB Pro 16GB SSD Samsung 980 1tb New PC does not post or display anything. Bench tested the new build and did not get an output to my monitors connected via hdmi which was weird but I thought I would...
  10. B

    [SOLVED] New ram causing issues

    Hi there, i just tried to install additional ram. My current build is Gigabyte X570 UD motherboard. Amd Ryzen 5 3600 cpu, Asus Geforce RTX 2060 gpu, 1x 8gb Crucial 3200Mhz DDR4 (model number CT8G4DFS832A). I bought an additional 8gb crucial ram stick (identical to my original) and placed it in...
  11. C

    [SOLVED] No POST on power on.

    PC Specs: CPU: Intel Core i5-8600K Coffee Lake 6-Core 3.6 GHz (4.3 GHz Turbo) LGA 1151 (300 Series) 95W BX80684I58600K Desktop Motherboard: MSI Z370I GAMING PRO CARBON AC LGA 1151 (300 Series) GPU: EVGA GeForce GTX 1060 6GB FTW+ GAMING ACX 3.0 Storage: Samsung 960 Evo M.2 NvMe Memory: CORSAIR...
  12. Oscar.carter13

    Question URGENT HELP REQUIRED - PC not POSTING

    So, this is going to be a bit of a long one, but I want to give you all as much info as possible. My pc is around 5 years old and custom build. Around half a year ago, I started to notice my PC started having issues. Around 20 - 40 mins of use would lead to a system lock or full shutdown. So...
  13. Zaross

    [SOLVED] Stuck in boot loop with no post

    I'm making a lan party pc with a 2700k in a msi z77ia motherboard and no matter what i do it just bootloops It was working fine last night My new lan pc keeps getting stuck in a boot loop with no post what so ever, it just keeps booting and resarting until it gets turned off Specs are as...
  14. H

    Question 1st New Built PC, won't post

    Hi there, new to these forums. I've been building a pc for the first time for my little brother. Specs are: Cpu: Ryzen 5 3600 Cooler: Cooler Master Hyper 212 Black Edition MoBo: AsRock B550 Phantom Gaming 4 Ram: G.Skills Ripjaws V 2x8GB Gpu: GTX 1080 founders edition Storage: hp m.2 256gb...
  15. yoyash1

    [SOLVED] Computer won't start in the morning

    I build this pc just 3 days ago AMD RYZEN 7 2700 16GB DDR4 3000MHZ CORSAIR VENGEANCE LPX COOLER MASTER MWE 550W MSI B450M GAMING PLUS GIGABYTE C200 GLASS EDITION GTX 750TI 2GB (From old build) I have old LG FLATRON monitor which is perfectly working without any problems one night my...
  16. T

    Build Advice Build problem, no display output, compatibility or software issue?

    In the last week I've been helping my friend build his first gaming pc. To start off, here are the specs: Case: nzxt h210 PSU: Corsair 80+ gold modular 650w Mobo: Msi B450i gaming plus ac (b450 in mini-itx form factor) CPU: AMD Ryzen 5 1600 (Research later showed this cpu doesn't support RAM...
  17. C

    Question Please help!!! PC wont post after i shut down during windows reset

    I was resetting my pc and accidentally turned it off, after some troubleshooting eventually it didnt even show a monitor signal. I tried everything including posting on several other forums but i couldn't figure it out on those...
  18. Senal Perera

    Question PC won't turn on after shutdown using Windows 10

    My PC was having a overheating problem and I accidentally broke the CPU cooler while cleaning it. So I took it to the repair shop and had a new CPU cooler installed. This fixed the issue but a new issue seemed to have developed. When I shutdown the PC using Windows 10 the PC shutsdown but...
  19. N

    Question Pc won't boot, no clue why

    Hello, I just created my account because I really need help with my pc. First of all I'not completely new into pc's and I generally know stuff about computers. I did the Windows 10, Version 1903 update I little while ago and since then my computer won't boot, this means: peripherals won't...
  20. Michael.Brown2779

    Question ASUS PRIME Z270-A no display

    First time boot, all fans spin, motherboard RGB lights all come on, motherboard power light is on solid green. No POST beeps (but if I fully remove all RAM, I get beeps telling me theres no RAM). Red CPU light flashes and then goes off, Yellow RAM light flashes, stays on for about a second and...
  21. M

    Can my motherboard support gaming graphic card

    My motherboard is Asus A68HM-K can she support GTX 1050 TI STRYX graphic card
  22. M

    driver for samsung 2009 wireless lan adapter

    how i will get the driver for samsung 2009 wireless lan adapter
  23. D

    purchase gtx980 now or wait?

    i've been price-watching the EVGA 4GB GeForce GTX 980 Superclocked video card for awhile now and today is the last day of the current deal on Newegg: $529.99 after MIR. i'm conflicted if i should wait to see if a better price comes along or get it now and take advantage of the lowest i've seen...
  24. G

    TP Link upgrade to DD-WRT

    Hello peoples. I have downloaded DD-WRT programme to my laptop. Now I'm going to upgrade my wireless TP-Link WR841N v8.4 router. But I see that the new ip address of the router will be 192.168.1.1 My Zyxel modem has a Lan ip address of 192.168.1.1 and I'm concerned that this will cause conflict...