Tuniq

hi :na:

Hello, i have an i5 2500 cpu and my mainboard is dh67bl would i be able to over clock it?how? sorry for the bad english

I just installed a fan controller as well as replaced a bunch of fans on my chasis to aftermarket ones. After a long time of taking out all the fans/installing new ones and hooking them up to the control I attempted to boot my PC and got the error "reboot and select proper boot device or insert...

Greetings, Hardware Summary: CPU: i7-2600K (Quad w Hyperthreading) CPU Fan: ThermalTake CLP0575 (2x130mm) MotherBoard: Maximus IV Extreme B3 Boot Disk: PNY P-SSD2S064GB-CT01RB (4xRaid 5) Hard Disk: Seagate ST2000DL003 (1x2TB) RAM: Corsair CT2KIT51264BA1339 (4x4GB) Video: Radeon HD 6770 ( 2xDVI...

Hi, I am looking for an EIDE interface WD high reliability HD

I am using this graphics card: http://ncix.com/products/?sku=58226&vpn=GV-R687OC-1GD&manufacture=Gigabyte I am unable to change any voltage settings with MSI Afterburner. I've searched around the web and found out that this particular card does not allow any voltage tampering. With 3 fans it...

Hello everybody, just wanted to thank you in advance for the help! :D So what I'm looking to put together is a machine that can play games such as Skyrim at a tolerable level, while being a home entertainment machine. Also, if any of you have a good suggestion for speakers (5.1-7.1) I'd...

Hey everyone, a few months ago i built my first PC and now my mate is looking to do the same. I just wanted to check with the experts whether the components are okay:) HDD: 500GB Seagate ST500DM002 Barracuda SATA 6Gb/s, 7200rpm, 16MB Cache, 8.5ms, NCQ RAM: 8GB Corsair DDR3 XMS3 PC3-12800...

Hello, I have a decent computer I built almost 4 years ago. It's a Core 2 Duo on a decent Gigabyte mobo, 8800GT, decent hard-drives and 4GB of 1066 Ballistix. I want to slowly upgrade this system to an i7 machine that will serve me well for another 4 years. I do a lot of programming, virtual...

I just bought an Asus z68 V-LE motherboard and this ram: G.SKILL F3-12800CL9D-8GBSR2 Sniper SE 8GB 2X4GB DDR3-1600 CL9-9-9-24 1.25V Memory Kit Do they work together?

First of all: WHY DOES THE BACKSPACE BUTTON NAVIGATE TO THE PAGE LAST VIEWED, ERASING ALL THAT I HAVE TYPED?!?!? More to the point: I recently purchased a Gateway LT2113u netbook from Newegg: Link w/specs. I also purchased a PNY 2GB ddr2-pc5300 667 MHz RAM upgrade: Newegg link. When I...

Hey guys came int a little issue... Trying to stress test/stability etc my CPU and I cant it seems... Probe II gives me idle temp of 30-32c, other programs around 40ish. Problem is.. literally as soon as I hit the stress test button my temp "Instantly" jumps 20-30c... Is that even possible or am...

Hello people! :) So this is my first time im building/getting parts for computer :) So here is the List : Processor : Intel® Core™ i3-3220 3.3GHz Videocard : Sapphire AMD/ATI Radeon HD7770 1GB GDDR5 PCIE 11201-02-20G (its an Ghz OC edition...) RAM : Kingston 8GB PC12800 DDR3 CL10 HYPERX...

Hello, I bought a PC last week, following are my configurations. AMD Phenom II x4 955, Gigabyte GA-880GM-USB3 (rev. 3.1), transcend DDR3 4GB RAM, 1TB seagate HDD. yesterday i installed windows7-64bit and Ubuntu 11.04, after restart i hear 4 long beep on POST and system is not booting up. i...

Hello, I bought a asrock z68 pro3 motherboard.Can anyone recommend what make of ddr3 memory i should get,and how many gigs?

how to update motherboard bios of m68mt-s2p gigabyte board and amd phenom x2 555 blackedition and working with windows 7

A couple nights ago, the computer worked fine, the next morning, it doesn't boot. first it says something about no partition, then next time it boots it goes to no bootable device screen. I stuck the drive into another computer (not as the boot drive) and then the "no bootable device" mesage...

Hello everyone, I am new here and I had to ask an important question: I am building me a gaming computer for fsx and I need help with picking out a motherboard. I am going to have 16 gb ddr3 1333 memory, 2-1 terrabite hard drives, dual radeon hd 6870 graphic cards, amd am3+ 6 core cpu, 900watt...

Hello, I just recently built a computer, its motherboard is Asus P8P67 rev 3.0. I recently got a WD Passport, it uses USB 3.0. So I attempted to connect the Passport to my USB 3.0 and nothing happens. The light on the Passport lights up but my comp isn't seeing the Passport at all. I attempted...

Hello,my daughter's college roommate sat on her flash drive and broke it. My daughter's final project is on the flash drive and due in 9 days. HELP

i wanted to reset my bios, i took out the cmos battery then reset jumper..now it doesnt start up at all it just gives me 2 short beeps then 3 beeps, what can the problem be?

I want to try and overclock my HP Media Center Computer. It is pretty much factory stock. I have replaced a burned out Power Supply from a 300 VDC to 640 Vdc I have changed the Video Card to a ATI Radeon 4600 I have increased the memory from 512 MB to 2 GB As noted above it has an ASUS...

processor intel core i5 with AMD video ram is it ok wats the advantage of having nvidia video ram??

Hi everyone, I currently have 2x2GB Gskill memory installed in my system and I've been running starcraft 2 for the past month on high settings 1080 res getting about 30 FPS, I eventually switched to medium settings because it was getting too slow during battle (under 30 fps) which got me about...

Hi all. Im having a little problem with my overclocked i5 2500k. I have it overclocked to 4.5ghz with voltage set to auto on the mobo and bclk set to 100mhz. (mobo is gigabyte ga-z68xp-ud4) Now I have used intel burn test and ran 20 test @ high and the temps are 55-60c and it is stable, i...

i accidently yanked out my cpu from the motherboard. the heatsink was stuck on the cpu so i didnt really think this through. i was wondering if this will leave any damage on the cpu? if it does,how i do i fix it?

Hey, This computer has been running for a few months now but now it wont even boot. The motherboard only has the green led blinking for both the old and the newly installed one. The power supply has also been switch out to a new Cool Max 500W Link Now the only thing that hasnt been tested is the...

So I recently installed a xspc rasa 750 rs 360 kit on my i72600k and I've already aireated it multiple times and reattached the block, but even with all that and a 360mm radiator, I'm still get temps of 80 degrees celsius at 4.2 Ghz. This is really bugging me, does anyone know how to fix this...

Is it good if we replace the chipset heatsink and place a new heatsink with fan..What is actually the main function of the chipset.Guide me...

is their? Any software or any thing else My Bios have no settings for that, it have settings for ram timings and voltage and nothing else amd athlon 64 x2 7750 non be msi k9n6pgm2-v motherboard

Hey, I recently purchased A 4gb x 2 set of ram from g.skill, the sniper edition. found here http://www.msy.com.au/product.jsp?productId=7650 So when i had installed them I booted my pc and it would crash, I then read up on it and basically understood that I had to change the timing, voltage...

Hello, i was previously using intel dg965ry board that died,now i have installed a new intel dg41rq board ,after installing windows 7 it is giving blank screen,,my harddisik is seagate 250gb and there is data in it that i dont want to loose so any help

Hey i have these Ripjaws X 2133mhz @ 1600mhz since mobo only support up to 1600mhz @ 8-8-8-20 TRFC 88 Memtest86+ 4.20 stable http://www.newegg.com/Product/Product.aspx?Item=N82E16820231468 It shows that it's a dual channel memory, so could i buy 1 more stick for triple channel? also my...

My PC was on for about 3hrs today morning. I installed a software and the PC shut down immediately and is not starting up again. Specs are in my signature. I've opened it up and saw when I turn the power switch on the motherboard standby LED lits up. However pressing the turn on key does...

hi was wondering if 1.66volts is safe for triple channle ddr3

Hi everybody i have a question. Does it matter how many sticks of ram u have in? like does it have to be even? and if i have dual channel ram and i put single channel ram in what will happen? or will it read it ok?? Thanks dayto

Archived from groups: alt.comp.periphs.mainboard.fic (More info?) Sometimes when i boot up my PC, and after the xp loading screen clears and it should go to the login screen, my monitor just goes black. But the green light on the monitor statys on. I find that if i pull out the monitor plug...

I have this motherboard and I have no booklet on it nor do I know which motherboard it is. I don't know the brand, etc. I tried looking on it but it seems to be generic or something since it doesn't say any major brand or model. It has numbers on other stuff like chipset stuff and the on the...

hello friends, i want to purchase an exellent air cooler for q6600...for overclocking it to max 3.9ghz...i have already purchased cooler master hyper 212 with extra silent 120mm blue led fan...i.e, heatsink with total two 120mm fans...but all my friends say that it is not good enough air...

I have an Asus GA-81945PL-G motherboard with 3 SATA hard Drives. When my system, running Win 2k starts up the post shows HD Master, HD slave and HD Master. How is this possible if SAta does not differentiate between Master and Slave. I am not able to get Xp to install on my 2nd HD. Any ideas?