Tuniq

Ok, a not so general question here about networking...I have a westell 2100 dual connect modem which has two ports on it, one of the ports is for Ethernet connection and the second port is for USB connection. Well, I have two computers and I was wondering if it would be possible to Link one of...

I've decided on the Corsair Vengeance low profile ram but wanted to know if 1.35V is ok, or if I should get the 1.5V ones? The white version of the ram is 1.35V where the black version and blue versions are 1.5V. CPU and Mobo: i7-2700K Gigabyte Z68X-UD3H-B Will this ram run well in my setup...

<A HREF="http://www.vanshardware.com/articles/2002/06/020620_Intel_To_Dump_Yamhill/020620_Intel_To_Dump_Yamhill.htm" target="_new">Intel To Dump Yamhill?</A> and <A HREF="http://www.theinquirer.net/19060235.htm" target="_new">Intel won't produce AMD clone</A> wish if there was UnDo in the life

First I direct you to this thread: http://www.tomshardware.com/forum/304745-30-timing-voltage-system I am experiencing the same issues. For well over 2 years I've been using Corsair XMS2 DHX 2gb sticks x 4 to achieve 8gb in my system. They were bough in pairs, but the pairs do not match. This...

Hi guys, I've read through the manual of the recently purchased p67a-ud4-b3 motherboard (beginning on page 79 related to this) Two questions: This is probably asked a lot, I have 2x 500gb WD SataII caviar blacks, can I plug it into the white sataIII ports and set up raid 0? is there a...

I have an A7M ASUS DDR board with an AMD 1.33 GHz and I ran some benchmarks on the 3dmark2001 tests. I noticed that on the website 4 mad orion, they have a chart for your system configurations and settings and it says that my front side bus is 133MHz. Isn't that supposed to read at 266? Just...

I tried to follow the other thread, but it was all abuse. I find that this review is critically flawed. It does show that Intel's thermal management is superiour to AMD's. The question remaining, though, is that of OVER engineering. The scenarios used in the description of failures that...

here's my specs: AMD 1GHz, 256mb, msi pro2-a board, 7200rpm 40gb quantum Win ME System resources on startup 78%. I'm pretty sure that this is an issue w/my OS but if I run my system for a few hours using a variety of programs, my system resources in some cases drop to 15% and I get an error...

Hello, I think my mobo is messed up could you guys help? Well, randomly my computer randomly kept on getting blues screens, so i guessed it was a memory problem. I ran memtest and in only 10 mins or so I had 100,000 errors, so I took out the ram in the first slot and only kept the second one...

Hello, I'm having hard time deciding which board I should buy, GA-P67A-UD3P-B3 or ASUS P8P67 EVO My GPU will be Gigabyte HD 6950 OC and MY CPU will be i5-2500k. I want to OC CPU to about 4,5 Ghz and install a good cooler. There's a problem with P8P67 EVO - some coolers don't fit. I don't know...

ihv a p4 2gb ram and 512graphic card, i intend to use autocad suite 2012 and want to upgrade to 4gb ram and 1gb graphics card is that possible / saleem khan

I have this RAM on my system right now. http://www.newegg.com/Product/Product.aspx?Item=N82E16820231314 It seems to be out of stock at the moment, and I want to buy myself another 8GB of RAM. I found this which looks like the same spec, but has a slightly different picture design. Does anyone...

Hello, I want an Intel motherboard for (8051microcontroller family)with EPROM, RAM, 8255 peripheral I/O interface devices connector such as 12bit A/D convertor, LCD/LED Monitor, printer, keyboard, mouse, PBL3717 stepper motor connector(2 nos.), LM335 temperature sensor, 12v-20w light sorce...

Hi, why my system run any 3d games lag? E8400 3.0 P6N nforc 650I SLI RAM : 2GB Plait GTX570 CM 750 Win7 Run Call.Of.Duty.Black.Ops , Crysis all lag why? or my ram need to update 4GB? :(

guyz plannin to build a desktop for gaming, watching HD movies n internet (no multi monitors no graphic designing no multi tasking no overclocking) think i5 wud suit(open to suggestions for i7) budget around 1000$ gpu(geforce> others..), mobo, monitor(23"), RAM, HDD will buy next week.. plz...

Hey Sry if this is the wrong area, it was kinda confusing but here is my problem. Specs: SSD 60 HD (OS + some programs) 1TB HD (storage) 8gig ram Standard optical drive asus (i4get the exact model) AMD 6core Processor Nvidia 550 Ti Windows 7 (trying to install Windows 8) I moved down, leaving...

I am planning on buidling a new computer and want to know if the ram will fit with the COOLER MASTER Hyper 212 EVO. The motherboard I will be getting is ASUS P8Z68-V PRO LGA 1155 Intel Z68 and the rams I want to get is CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)...

I'm starting to put together the component list for my new PC, and to start with I'm looking at the motherboard. To start with, my CPU of choice will be an i7. My main concern is going to be slot space on the board, as my current GPU solution is to take my existing double-height XFX HD5770 and...

replace the water with mineral oil so that if it leaks it wont even matter? would it affect performance?

Hi everyone, I have a desktop that I fairly recently built, and I'm interesting in finding a cooling method that will be more efficient (and, yes, quieter) than the stock fans that came with my housing (Cooler Master HAF 932) and CPU (i7-990x). I like the idea of liquid cooling, but I wouldn't...

installing new windows and when I get to the part where I have to type my name in as well as PC name my keyboard is off. IT will be lit up and on for the normal boot up process but then dead when I need to use it. Logitech g15. I also have the logitech g13 game pad and that works just...

Hey guys, I have the H60 Liquid Cooler (stock thermal paste), but with 2 Corsair High performance SP120mm Fans they spin at 2,350 RPM and have a static airflow of 3.1mm. I am push/pull from the inside of my case exhausting out of the case (probably not the best since I have an A/C unit I could...

I am planning on a new build over the next couple weeks and would like to get some opinions on a Z68 motherboard choice. I plan on using the following: CPU: i7 2700k 16GB DDR3 2133 GSkill OCZ Vertex Sata 2 200GB 2-3 EVGA GTX 580 1.5GB until I can afford to upgrade to 590s Does 1600-2133...

HI all I just got the new sabertooth 990 fx and a new amd phenom 1100 six core black edition and 8 gbs new ripjaw ddr2 1600 and a radion 6850 GPU with a rosewell 700 watt psu and a 500 gb 6gb sata hdd and mt problem is when i go to turn it on and hold down the delete key is flashes words on the...

Hi, While trying to take out the video card, the damned thing slipped my hand and I've managed to make 2 tiny scratches on my motherboard. Everything works ok, as far as I can see the scratch is not deep, but I wanted to know if in time it can corrode or something ? Also, is it safe to use...

Hi, i changed motherboard of HP dv600 but when i start the computer but after few second its shutdown. Fan working properly, no beep sound heard, i want to ask you is there any setting in BIOS or is the processor paste or something else.

Hello, I've got a bay in my laptop for a second hard drive, and I'm trying to choose between one of these: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007605%20600030592%20600003341%20600003459&IsNodeId=1&name=SATA%203.0Gb%2fs If I go for the WD with 32 MB Cache over the...

Hello everyone, I've been trying to find parts to be able to build my own computer in a $500-$600 (This includes the monitor and keyboard). The thing is I really have no clue what are the best parts to buy. I want to be able to play Guild Wars 2 on medium-high settings on a steady fps. Low would...

K so i have window 7 32bit and I want to get window 7 64 bit. From my understandings..i have to do a clean install. I backup my files and I am getting ready to wipe out my harddrive. The problem is i cant boot from the cd drive. I made my cd drive first priority in BIOS boot settings. Any helps?

Hello tom's community: I am in the process of building my first computer and want it to be extremely upgradeable. I believe that getting dual 3.0 x16 PCI-E slots is the way to go. However I have not been able to locate a Z68 motherboard that can satisfy these parameters, does anyone know if...

I am ordering a new system to run Microsoft Flight Simulator (FS9 & FSX). The basic specs are: Windows 7 Home Premium 64 bit Gigabyte GA-X58A-UD3R Motherboard Intel Core i7 950 3.06GHz - Overclocked to 4.00GHz GeForce GTX 460 Sonic 2048MB Graphics Corsair XMS3 6GB (3x2GB) DDR3 12800C9 1600MHz...

Will I encounter any problems with running 2x800mhz on a Phenom II 980, if the motherboard supports the 1600mhz cl 7-8-7-20 dimm's? Not my first build, but I've never gone over the official numbers. I know the gain isn't much, but it must be present. Will be grateful for any answers and tips

Apologies if this has been posted in the wrong place - I think this may be related to Bios settings but not sure. I've just purchased a Blackgold BGT3600 TV Tuner. This is a PCI-e card - and needing a 6 pin power connection from the PSU. I've got a GA-MA78GM-DS2H motherboard. I've had no...

Hi there! Well I started this threat for a couple of questions: 1st: In real world gaming, bf3, WOW, Dirt 3, SC 2 and some others multiplayer online games what gives major impact? My Phenom II x4 945 @ 3.8ghz + ram 1390mhz VS 3.6ghz + ran 1600mhz? 2nd: My ram works kinda weird as the...

Hi, My 1st gen H67 died so I replaced the mobo with this ASUS P8Z68: http://usa.asus.com/Motherboards/Intel_Socket_1155/P8Z68V_LX/#specifications The PC was configured as AHCI with a 120GB SSD boot drive and 2 SATA HDs. I replaced the mobo without incident, but can't figure out how to get...

Hey guys ! Building me a new gaming pc and really cant decide if I should go for a ssd or not, my main game is WOW. Do I get me a intel 25x (or is it x25) to store os and WOW, or is it just a waste of money atm compaired to say 4 x samsung f3 500 gb in a raid 0 set upp ? Do I get my moneys worth...

Hey, I am looking, and struggling to find, some decent and affordable 1866MHz memory for my new A8-3850. I am from England and on all the trusted websites I know from here, there is basically nothing. I know that the Llano chips only supports up to 1866MHz speeds and I also know there is a...

So before I overclocked to 3.3 ghz the max temp was around 60C to a min temp of 45C. I have recently installed a new graphics card (Asus Nvidia geforce gt520) and the temperature blasted to min of 50C and a max of 74C. I reverted back to 3.0ghz and the idle temp is still 50c and reached the low...

Hey Tomshardware, HAPPY WEEKEND! WOO So, I recently purchased: GTX 680 (Oh yeah) i5-3570k (hell yeah) and an ASRock Extreme6 (lol yeah it's okay) I'm thinking of using the ram from my old system: Patriot Gamer 2 Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) I don't know...

New Build - have a problem. running windows 7 ultimate. build is based on Techo's game build favorite I5 processor Gigabyte Mbd GA-Z68A-D3H-B3 motherboard After increasing the memory from 8G ( 2x4g Gskill ripjaws F3-8500CL-7D-*GBRL) ddr3 up to 16 G ( all 4 DDR3 dimms installed) now keep...