UEFI BIOS

So my Quadro m2000 works with legacy bios but not with UEFI even though the firmware supports it i can boot into windowd using the igpu in uefi and the card shows up normally but i can't change to display on it i did the firmware update for DP this problem is driving me insane

Hello, I'm new here! I'm trying to fix an issue with my storage units by upgrading my BIOS version for my ASUS Z690-A Motherboard. However I've heard people say that upgrading from a version that's got a big leap between updates could potentially brick my PC For example I am on ver 0403...

Hey everyone, Im trying to boot a UEFI file through a usb on my PC which was going fine until I stumbled upon a weird problem. Now Ive got everything setup correctly in the USB but for some reason the prompt just turns into a black screen instead of asking me to unplug the USB and then booting...

This really isn't a life-threatening issue or anything, but my PC skips past the post splash screen and straight into Windows. Forcing it to enter BIOS/boot into UEFI mode just shows a blank screen. Similarly, resetting the CMOS also displays nothing. I recently upgraded from a GTX1050 to an...

I was changing settings in my BIOS (I believe it was changing something from Legacy to UEFI, trying to change it to Secure Boot and enabling some Intel Platform something stuff), restarted my computer, and now I have no display and my PC is turning on and off repeatedly. I unplugged the...

So, spent all night and this entire morning trying to get the desktop I built yesterday to boot with UEFI Bios. I have a SSD from my old desktop with Windows 10 Pro installed and when plugging it into the new desktop, it works fine and boots as normal. My new SSD is also discovered in bios and...

Hi, my cpu i5-4670k,cpu cooler-Hyper 212X , gpu - Asrock rx 7800xt challenger oc, mobo- gigabyte z87x-ud3h, bios version F10b, corsair ram 4x4gb @1600 mhz dual channel, Crucia MX 500 500gb ssd,windows10, Hi, in my bios default setting, boot option is set to UEFI and legacy, can this cause any...

Hey can someone help me out with this, i have a aorus z390 motherboard with the aorus gigabyte bios, i have 2 disks, disk 0 and disk 1, when i installed windows, it installed the mbr on disk 0 and windows on disk 1, i then used a software (i think it was bcd) to move the bootable system files...

Recently my computer which I assembled with a friend about a year ago started giving weird errors with a specific game, it already did it before with youtube but it was very rare, around once every two months so I never paid it too much mind , it will simply freeze the computer completely...

Hello now was working on win 11 with no any problem and last night I turned off my pc and today when try to open it i got this Problem And when try to install new windows 11 by usb when enter to flash drive i got same thing and now i tried to install windows 10 and the system lunch with no...

I bought a brand new Win 11 Home Gaming PC from a store for around $1000, the specs are: - MSi A520M-A PRO Motherboard - AMD Ryzen 5 5600 Processor - NVIDIA GeForce RTX 3060 Ti Graphics - 16GB of DDR4 RAM running at 3200MHz - 1TB M2 NVME SSD In Windows 11 under Device Security settings...

I set uefi to the Partition that says N/A (Partition don't know) to boot last. When I press save, the screen is completely black, can't access uefi, keyboard, mouse and lan cable don't work, bios reset doesn't work, motherboard asus P8H61-M LX PLUS #uefi #pc

OS - WINDOWS 10 CPU - AMD RYZEN 5 56OOX MB - MSI B550-A PRO AM4 (LATEST BIOS AND CHIPSET) RAM - HYPERX FURY DDR4 )2x8GB) DUAL CHANNEL @ 1199HMZ (17-17-17-39) // I bought the 3200mhz cl16 but when I enable xmp -> i get blue screen. I dont really mind cuz as long as it works/ havent gotten...

Mobo is the Asus Z170 Sabertooth Mark 1 This all started after a blessed Windows update: 2022-08 Security Update for Windows 10 KB5012170: What it is: Security Update for Secure Boot DBX "Windows devices that has Unified Extensible Firmware Interface (UEFI) based firmware can run with Secure...

Hello. I plan to buy an ASRock H510M-HDV R2.0 motherboard, but my video card does not support UEFI. The motherboard will start up immediately (it will switch to CSM mode automatically) or I will need to look for another video card with UEFI support and install it in the computer to change the...

if I perform a bios/uefi update, will the update go to perform a clean flash (remove old version - install new version), or will it only update the affected part? if i end up with the bios/uefi infected with malware, will the reflash/update go to remove it?

I don't know where to properly post this Yesterday: I was previously signed onto my account and was about to log into a game with my friends for a session, but it suddenly froze. I waited for almost 20 minutes before I pushed the power button and forced it to restart. However, when it went...

Hello everyone! I have a Laptop Dell Precision M4800 with i7-4810MQ CPU, with the latest BIOS update (the version of latest update was released in 2019) I installed windows 10 on the HDD with UEFI Windows 10 which works properly. I bought a new SSD Crucial MX500 250GB, and I wanted to replace...

Lenovo Yoga 920-13ikb bios 5NCN41WW currently with Win11, likely upgraded from Win10 in the past From approximately 2017-2018 TPM 2.0, Intel PTT Bitlocker Recovery: “You need to enter your recovery key because Secure Boot policy has unexpectedly changed.” I was helping someone with their...

The message is "Due to Microsoft boot regulations, ensure that the Microsoft signed UEFI driver is contained in the plugged PCI-E based storage including m.2 SSD before set the launch CSM to [DISABLED]. Otherwise, the PCI-E based storages will be only available for the data drive usage. Contact...

Oh help - i really screwed up Asus Z97M-Plus motherboard, Windows 10 fresh install So i had a failed SSD with my original boot drive, i swapped it out and reinstalled windows - everything was perfect ... Then i found a copy of my original user folder from the old installation - so i copied...

I have a laptop without a screen, I use it on an external monitor using a vga output, its boot system was csm and I modified the BIOS to use another hard that boots via uefi and when saving the setting, I rebooted and the screen became black and there is no response, I tried several ways such as...

Hi all, I was attempting to use the Surface Hub Recovery Tool to reimage the drive of our office's interactive whiteboard. Long story short: the OS began boot looping following the latest bout of updates. When I connected the drive via a USB dock, the drive showed up in Device Manager as a...

Motherboard: Asrock B560 pro4 GPU: AMD RX 580 CPU: Intel i7 10700F Recently, I entered the uEFI utility settings(F2). Then I turned on the Ultra Fastboot option ,now There is no HDMI signal on boot animation, uEFI utility and windows recovery. Tried to reset the CMOS tho shorted the CLRMOS1 pin...

Hello, I have a gigabite AB350-gaming3 motherboard. During boot (in what I believe is bios) I set the "Storage boot option control" to UEFI only (from legacy only). This has caused my PC to be unable to start, stating something about repairing. I have reversed this back to "legacy only" but the...

I did something pretty dang stupid. Googled how to disable secure boot on an ASUS motherboard and skimmed through the steps. I didn’t read that I had to backup keys, so I can enable secure boot again. Now I deleted my PK key, whatever that is, and don‘t have a backup. Can I restore it again...

I tried to switch csm to auto and the buzzer goes ok sign( 1 different beep) then it goes the error. 1 long beep 3 short beeps and after 3-4 secs 1 short beep( not the okay one. Can someone tell me how can I get back in Bios to change it back? My Mobo is Asus Prime A320M-K

Hi everyone. I have a ROG Strix Z390-E Gaming motherboard with BIOS version 1502. I bought a KVM switch in order to swap between my laptop and my desktop whenever I need to. The KVM has USB A HID in ports and USB-C out ports so I plugged it into the USB C port on my desktop. However, The...

When i go to: Windows settings > update and security > recovery > advanced startup > restart pc into advanced startup > go to UEFI firmware settings > restart to open UEFI firmware settings, the PC just restarts normally into windows 10, and trying to enter BIOS by using the keyboard keys while...

just installed windows 11 and enabled uefi instead of csm due to enabling tpm 2.0, tried to get into bios but pc just stays turned on but showing a black screen, i can do nothing except hard-restarting the pc and let it boot into the system. the only way for me to access bios now is to reset...

Hi, I have a question regarding an older GPU that was running fine in my older system, but refuses to work in my new system. CPU: i5 11400 Motherboard: B560M Aorus Pro Ram: 16GB Crucial Ballistix 3200 Mhz (XMP enabled) SSD/HDD: 1TB M.2 NVMe, 2TB 7200rpm HDD GPU: AMD Radeon r9 270x 2gb sapphire...

I am sure that this is posted quite often, but I can't seem to find anything that quite fits me. CPU: Ryzen 5 2600X (Auto OC at 3800MHz) GPU: Sapphire Radeon RX 5700 XT Nitro+ OC 8 GB RAM: HyperX Predator 3000mhz 2x8GB + 2x4GB CL15 (Same type, just different size) MB: ASUS TUF X470-Plus Gaming...

I get a blank screen 50% of the time I turn on or restart the computer. If turn off and on the computer again, I get an error message for UEFI: "The system failed to boot several times before." Then it gives me the option to press F2 to get into the UEFI boot settings menus or just wait for...

Hello everyone, I have Asrock 970Pro3 paired with Phenom II x2 555BE unlocked to Phenom II x4 B55 and 24GB RAM (my Proxmox homelab). I have some weird problem and I can't figure out where is the problem. MB doesn't save the UEFI settings for the CPU like frequency or voltage in stock or in...

So I took a look at my bios settings, because why not, and I couldn't find CnQ. I'm currently on the latest (2.80) version, and the latest chipset drivers are also downloaded. Was it removed?

Hello everyone, :) I am using following PC config CPU - i3 4th gen Mobo - Asus H81m-cs RAM - AData1333Mhz 4GB x 2 HDD - Crucial crucial BX500 240GB For OS, 1 TB Seagate Baracuda HDD for Storage My pc's previous Hard disk was dead, So i purchased new SSD (240GB) and 1 TB Seagate...

I intend to install Windows 11 in UEFI mode and my current Windows 10 is installed in BIOS instead of UEFI in an MBR SSD. I will be converting my SSD to GPT. Do I need to convert the Flash Drive which I will be using install windows 11 to GPT? I'm not very knowledgeable in all the BIOS stuff.

specs: Gigabyte Z170X Gaming 7 i7 6700k (2 x 16) HyperX RAM Everything was working fine until I tried 2 Corsair RAM sticks to chek if they were defective and they booted just fine, but when I went back to my old HyperX sticks I noticed there was no spashscreen and when I tried to access...

Hey All! I just installed a new Samsung 980 PRO M.2 SSD (2TB) to replace my old Western Digital SATA III SSD (250 GB). I installed the Samsung Drive, cloned the old drive onto the new drive using Samsung Data Migration and then went into the bios and set the Samsung Drive as the first priority...

Built a computer last year for the first time, and thought I'd try this Re-Sizable Bar feature for the RTX 3080. However I ran into a problem, Resizable Bar requires CSM to be disabled, and when I disable CSM my Samsung 970 Evo Plus 2tb M.2 Drive cannot be found in the BIOS at all, with nothing...