Question 2 years old pc underperforming

[spellwapf]

As I said in title , my pc got slower and slower recently and i blamed it on the internet speed , but I decided to try benchmarking it and the results told me that the pc is performing below expectations, and the cpu is in the 6th percentile. can anyone help me out and tell me how to try and fix it? the link is: https://www.userbenchmark.com/UserRun/55648210
thanks in advance!

 

[kanewolf]

As I said in title , my pc got slower and slower recently and i blamed it on the internet speed , but I decided to try benchmarking it and the results told me that the pc is performing below expectations, and the cpu is in the 6th percentile. can anyone help me out and tell me how to try and fix it? the link is: https://www.userbenchmark.com/UserRun/55648210
thanks in advance!

Start by enabling XMP for the RAM in your BIOS.
You have a KF CPU in a B motherboard. The power infrastructure of the motherboard could be limiting.

 

[spellwapf]

Start by enabling XMP for the RAM in your BIOS.
You have a KF CPU in a B motherboard. The power infrastructure of the motherboard could be limiting.

i did, it improved a bit
any idea how to continue from here? thanks again
new test -
https://www.userbenchmark.com/UserRun/55648873

 

[kanewolf]

i did, it improved a bit
any idea how to continue from here? thanks again
new test -
https://www.userbenchmark.com/UserRun/55648873

Still only running 2666. You might investigate your RAM timing some more.

 

[--SID--]

Still only running 2666. You might investigate your RAM timing some more.

RAM doesn't run faster than 2666 on B365.

i did, it improved a bit
any idea how to continue from here? thanks again
new test -
https://www.userbenchmark.com/UserRun/55648873

What are the temps of CPU and motherboard VRM according to HWinfo64?

 

[spellwapf]

RAM doesn't run faster than 2666 on B365.

What are the temps of CPU and motherboard VRM according to HWinfo64?

https://ibb.co/3dw9qHh
i think those are the things you meant couldnt figure if to send avg or max

 

[punkncat]

OP, that motherboard has absolutely and positively too little power delivery for a 9900KF. That motherboard was best left for the non K i3 and i5 variants. It looks fine but is completely inadequate for a CPU of that nature.

 

[spellwapf]

OP, that motherboard has absolutely and positively too little power delivery for a 9900KF. That motherboard was best left for the non K i3 and i5 variants. It looks fine but is completely inadequate for a CPU of that nature.

oh damn
i checked it before buying and the internet said its compatible 🙁
i will buy a new one
got any good value recommendations? thanks

 

[Bob.B]

i did, it improved a bit
any idea how to continue from here? thanks again
new test -
https://www.userbenchmark.com/UserRun/55648873

Try this.

Reboot.
Wait a few mins.
Run UBM with the browser closed.
Post a link to the results.

 

[spellwapf]

Try this.

Reboot.
Wait a few mins.
Run UBM with the browser closed.
Post a link to the results.

i did, slight upgrade again
https://www.userbenchmark.com/UserRun/55652755

 

[Bob.B]

i did, slight upgrade again
https://www.userbenchmark.com/UserRun/55652755

Your showing a lot of background stuff running.

This causes UBM numbers to be a little wonky.

Run UBM again and make sure you run UBM like I said.

 

[spellwapf]

Your showing a lot of background stuff running.

This causes UBM numbers to be a little wonky.

Run UBM again and make sure you run UBM like I said.

done https://www.userbenchmark.com/UserRun/55653014

 

[Bob.B]

done https://www.userbenchmark.com/UserRun/55653014

That shows 4GB of stuff loading at startup.

Make your startup group skinny don't load unneeded stuff.

 

[--SID--]

https://ibb.co/3dw9qHh
i think those are the things you meant couldnt figure if to send avg or max

Try again while you're running Prime95 or Furmark on the CPU.