[SOLVED] 3950X EDC 100% 230 A. Is this OK?

[EridanusSV]

In playing most games, I get a solid 85% to 95% & 100% on load EDC of 230A.

THE QUESTION: Is this ok? Or will it damage my chip later on?

Crosshair VIII X570
4.4GHz, 1.33750V
PPT: 395
TDC: 255
EDC: 230

Max Temp CPU-Z: 70c https://valid.x86.fr/7zig1i
Max Temp GeekBench: 60c
Max Temp Cine20: 80c
Max Temp Stream x264 Slow Preset: 60c

CPU-Z Score: https://valid.x86.fr/7zig1i
GeekBench Scores: https://browser.geekbench.com/user/340754
Cb20 Score:

https://imgur.com/oOg8uED

View: https://imgur.com/oOg8uED

 

[beorn]

Are you sure you didn't wanna just show off your score? 😀

But personally I don't really even think they're worth overclocking, because you lose the higher lightly threaded boost. I have a 3900X and on stock I get a slightly higher GeekBench score, although of course your multi has me beat by a good 25-30%, but that's mostly due to the higher core count

 

[EridanusSV]

Are you sure you didn't wanna just show off your score? 😀

That crossed my mind. But I am concerned with 230 amps vrm output on max load. But I got my scores and I don't think I'll ever be in position that I'm going to be on max load. I'm just curious if it could cause damage to my parts. That's all.

 

[mdd1963]

Hardware Unboxed (on YOutube) has done quite a few VRM temp measuring/analysis videos for several Rzen mainboards; perhaps you can find yours included....(there are some 120C temps at VRM mainboards, where caution would be warranted, vice compared to the relatively cool 95-100C mainboards)

 

[EridanusSV]

Hardware Unboxed (on YOutube) has done quite a few VRM temp measuring/analysis videos for several Rzen mainboards; perhaps you can find yours included....(there are some 120C temps at VRM mainboards, where caution would be warranted, vice compared to the relatively cool 95-100C mainboards)

I saw that video. This one configuration is from Builzoid though. According to him, these are the settings he runs his 3950X in. But I went back to Auto instead of 44 and Auto Voltage, now my max load hovers around 180 A out of 230.