5760x1080 doesnt work!? PLEASE HELP ITS KINDA URGENT

[gameridgoeshere]

Hi
I have a GTX 680 running on 3 monitors (Connections are a DVI, DVI to HDMI and a HDMI) and It won't run at 5760x1080, as in I have no option to do so, even though my monitors normally run at 1920x1080... Why is this!? PLEASE HELP, the max res I can choose is 4523x900 🙁

Thanks

Dan

 

[monsta]

Downloaded and installed the latest drivers from nvidia?

 

[gameridgoeshere]

Downloaded and installed the latest drivers from nvidia?

yep, 301.10

 

[refillable]

i think You need to use Display Port.

 

[gameridgoeshere]

i think You need to use Display Port.

why would i need to do that?

 

[Swolern]

That's weird. Only thing i can suggest a fresh re-install of drivers.

 

[gameridgoeshere]

That's weird. Only thing i can suggest a fresh re-install of drivers.

already did a clean install when updating from 300 to 301.10 so yeah

 

[AidanJC]

Do you have surround mode activated? I know it's a silly question. But ya never know.

 

[Guest]

are all your monitors the same make/model?
How To Setup NVIDIA Surround on GeForce 600 Series GPUs

 

[gameridgoeshere]

are all your monitors the same make/model?
How To Setup NVIDIA Surround on GeForce 600 Series GPUs

they r not but it says that shouldnt be a problem

 

[Guest]

ah, sorry for my ignorance.

i was reading on the forums about setting a custom display in the surround control panel; did you consider that?

 

[gameridgoeshere]

ah, sorry for my ignorance.

i was reading on the forums about setting a custom display in the surround control panel; did you consider that?

how to do that? i think thats what i have but im not sure

 

[Guest]

not exactly sure since i have a 550ti and 1 monitor but this is what i see:

i think if you make a mistake, the "timeout" will reset it.

thats all i can do to be helpful and not a PITA.

good luck

 

[gameridgoeshere]

not exactly sure since i have a 550ti and 1 monitor but this is what i see:
http://img651.imageshack.us/img651/8393/capturelcf.jpg
i think if you make a mistake, the "timeout" will reset it.

thats all i can do to be helpful and not a PITA.

good luck

Yeah but when i do that it says Test failed.
Custom resolution 5760x1080 at 60Hz (32-bit) is not supported by your display.

🙁

 

[Guest]

i guess that is for single display. can you do something like that here?:

 

[Mousemonkey]

Maybe it's the DVI > HDMI adapter? The only review I've seen about the Surround setup on the GTX680 stated that they were using DVI, DVI & HDMI.

 

[gameridgoeshere]

Maybe it's the DVI > HDMI adapter? The only review I've seen about the Surround setup on the GTX680 stated that they were using DVI, DVI & HDMI.

So should I buy a display port to HDMI?

 

[Rockdpm]

Possibly. but your card should have come with an adapter

 

[Hydroc10]

I could be wrong but before the 680 nvidia could only do 2 displays, and I read somthing about the 680s needing to use display port for 3 so get 1 or 2 if your card has 2 mini display ports.

 

[gameridgoeshere]

Possibly. but your card should have come with an adapter

Yeah, well it didn't.

 

[gameridgoeshere]

I could be wrong but before the 680 nvidia could only do 2 displays, and I read somthing about the 680s needing to use display port for 3 so get 1 or 2 if your card has 2 mini display ports.

That's for 3D Vision surround and it only has one DISPLAY PORT not MINI DISPLAY PORT

 

[Mousemonkey]

I could be wrong but before the 680 nvidia could only do 2 displays, and I read somthing about the 680s needing to use display port for 3 so get 1 or 2 if your card has 2 mini display ports.

We put each high-end card into our test-rig and connected them up to three BenQ EW2430 full-HD 24in monitors, resulting in an overall 5,760x1,080 resolution. Both cards are easy to setup, and NVIDIA's procedure even shows you, via an on-screen graphic, that the preferred setup for three-screen gaming is availed through using both DVI ports and the HDMI.

 

[gameridgoeshere]

We put each high-end card into our test-rig and connected them up to three BenQ EW2430 full-HD 24in monitors, resulting in an overall 5,760x1,080 resolution. Both cards are easy to setup, and NVIDIA's procedure even shows you, via an on-screen graphic, that the preferred setup for three-screen gaming is availed through using both DVI ports and the HDMI.

so what do i do!?

 

[Mousemonkey]

so what do i do!?

You could try different adapters or another DVI monitor if you can borrow one.

 

[gameridgoeshere]

You could try different adapters or another DVI monitor if you can borrow one.

cant get another monitor but what other adapters?