Question amd processor Ryzen 5 5600 issues

[Tennobyte]

PC:
GPU - Rtx2070Super EVGA
CPU - Ryzen 5 5600 himself
MB - msi B450m pro vdh max
PSU - PCCooler GI-K800
RAM - 32GB (16x2) ballistix 3200mhz 16-18-36

The issue is about CPU freezing, it's pretty glitchy. I always get stutters and freezes on CPU side. Who can help me figure out, is that RAM, MB, CPU or something else?

So, in conclusion i figured out that the trouble here is somewhere around the CPU. This overrated AMD giggle is not working properly until multiplier is set to x45.0
Honestly motherboard is definitely no designed to handle this frequency in 100% cpu load. It is above manufacturer frequency and considered as overclocking.

I've never liked AMD much for either their GPUs or CPUs. I hate AMD from now on. Maybe you got any ideas what is real trouble here?

Yes, the PSU might not be the best, however most people in my country (Kazakhstan) keep using "KCAS", Cougar STX, and Deepcool DE / PF. On builds with GPUs such as RTX3080. That's horrible. I'm not even the worst here.

 

[COLGeek]

If you stop overclocking the CPU, does the freezing stop?

What CPU cooler/heatink are you using?

 

[Tennobyte]

If you stop overclocking the CPU, does the freezing stop?

What CPU cooler/heatink are you using?

if I reset CMOS (BIOS) to default settings, without any overclock, it will feel even worse. More stuttering, more glitches.

Heatsink is some simple one, but in actual game it does not overheat.

 

[COLGeek]

Stuttering/glitches in what? Some particular game or just in general?

Is the cooler the stock AMD cooler? Or something else?

 

[Tennobyte]

Stuttering/glitches in what? Some particular game or just in general?

Is the cooler the stock AMD cooler? Or something else?

Something crappy as this:

https://imgur.com/a/Op4mJ7i

View: https://imgur.com/a/Op4mJ7i


Yes, the issue happening in every single application except for windows desktop probably xD. However selecting too much icons on desktop will result a small lag.

 

[COLGeek]

There are multiple issues I see.

The CPU is likely not being cooled properly. I would get a better cooler for the CPU.

You need a rear exhaust fan. You need better airflow over the motherboard components that surround the CPU itself.

Your HDDs are going to have a short, miserable life if not mounted properly. Those need to be secured properly to prevent physical damage inside the drives themselves.

Do you have any front fans?

 

[Tennobyte]

There are multiple issues I see.

The CPU is likely not being cooled properly. I would get a better cooler for the CPU.

You need a rear exhaust fan. You need better airflow over the motherboard components that surround the CPU itself.

Your HDDs are going to have a short, miserable life if not mounted properly. Those need to be secured properly to prevent physical damage inside the drives themselves.

Do you have any front fans?

No any case fans. The drives... Well, they are not complaining...

What about drive mounting... Well, the wires is very tough so it will act as an suspension like a car one.

Here's third drive 😀

https://imgur.com/a/2BDyydT

View: https://imgur.com/a/2BDyydT


Yes, I'm a "engineer"

 

[punkncat]

Can you please list the entire build including the power supply details?

Reset BIOS and leave all OC off. Take a house fan and aim it directly inside the case with the most flow going directly at the CPU/VRM area on the board there. Any improvement?

Are you monitoring temps with something like Core Temps or HWI?

 

[COLGeek]

Do you have a room fan that you can use to blow air directly into the case while your PC is in use? If this allows the system to perform better, then that would confirm you have an airflow/cooling issue.

Why do you have loose HDDs?