hello everyone
doom looks like this when Im trying to play, can you please tell me what is this?
https://files.fm/u/sqy49yja
doom looks like this when Im trying to play, can you please tell me what is this?
https://files.fm/u/sqy49yja
I'd start with a full DDU cleanup of the GPU drivers and a reinstall of the latest drivers.
Not 100% sure, but I believe it has to do with your card's Vram: either overheating, or Vram error.
For that latter one, I think that was the main cause of high RMA rates for 2080Tis specifically.
You are not running an overclock on your cards memory are you? If so try and remove it. If that does not work you can try underclocking the vram frequency with something like msi afterburner. Drop the memory by 50mhz at a time until it goes away. It works sometimes, sometimes not but I wish you good luck.
No problem buddy as I really do hope it works. If it doesn't it could be the vram overheating also, so make sure the card has good airflow in the case, and the temperatures are good. Sometimes removing the backplate will help temperatures especially if case airflow is not great.
update..it runs around 68c according to NZXT program I have, do u know any other good program to check temps? I have underclocked by - 50 to -550 and these artifacts where there until it crashed :/ ! any other ideas?
It does seem strange that underclocking the core would fix it yet vram underclocking wouldn't as artifacts are generally caused by vram. It is however possible that heat is the cause and by running lower clocks, your gpu temperature is lower causing the vram to run cooler. Bear in mind that gpu temperature and vram temperature are different. The vram is placed around the gpu core. This is why I asked if it happens straight away or after playing for a moment. If that fixed it you could try seeing what voltage your card is at when - 450 on the clocks by enabling voltage monitoring in afterburner settings. You could then undervolt your gpu and increase the frequency again to gain back some performance.View: https://m.youtube.com/watch?v=roS9HPxyiy4
-quick undervolt guide.
Ok well usually if it's the core it will crash, and the vram errors will show up as artifacts and flashes. GPU manufacturers are guilty of not ensuring sufficient airflow over the vrm and vram chips. A few thermal pads simply is not enough considering they are sold for so much money. There should be good airflow over them and I think a pcb redesign is badly needed. This exposure to excessive heat over time causes them to fail. Your core temp could be perfect, yet your vram and vrm temperature is not being monitored at all. If underclocking is all that works, I would undervolt until you find the highest voltage and frequency where it does not happen. At least this way it is still useable. Has the card ever been opened by you, or a previous owner? If so the vram and vrm thermal pads could be missing. This wouldn't help. The damage has probably already been done but some vrm heatsinks and ensuring sufficient vram cooling might be worth a try, but it's a very long shot. Best of luck buddy but I think undervolting is the way to go.
They will not touch it unless warranty is still valid. You could try and take it apart yourself but make sure to have thermal paste to reapply on the gpu. Clean the whole pcb and all the dust from it and the heatsink and fins. Make sure the thermal pads are in place and if they are don't touch them. If any fins are bent try and straighten them so air can pass through easily. If it doesn't work you will just have to undervolt it. Sorry I couldn't be of more help.