Hello,
I have a Asus X99-Deluxe motherboard, and i7-5960X CPU. I am unable to recover the BIOS setting. Even after hitting the F1 key to run setup, the screen is blank and I dont see the bios settings. Here is the error message.
USB Devices total: O Drive, 1 Keyboard, 0 Mouse, 4 Hubs
Detected ATA/ATAPI Devices... P4: SanDisk SDSSDXPS 480G
Please enter setup to recover BIOS setting. Power supply surges detected during the previous power on. ASUS Anti-Surge was triggered to protect system from unstable power supply unit! Memory OK! succeeds in system booting! Enter BIOS setup menu and save the memory se or visit ASUS website (www.asus.com) for latest BIOS version.
CPU Over Voltage Error!
When RAID configuration was built, ensure to set SATA Configuration to RAID mode.
Press F1 to Run SETUP
Troubleshooting steps tried:
Let me know if anyone else had similar issues or can recommend further debugging steps.
I have a Asus X99-Deluxe motherboard, and i7-5960X CPU. I am unable to recover the BIOS setting. Even after hitting the F1 key to run setup, the screen is blank and I dont see the bios settings. Here is the error message.
USB Devices total: O Drive, 1 Keyboard, 0 Mouse, 4 Hubs
Detected ATA/ATAPI Devices... P4: SanDisk SDSSDXPS 480G
Please enter setup to recover BIOS setting. Power supply surges detected during the previous power on. ASUS Anti-Surge was triggered to protect system from unstable power supply unit! Memory OK! succeeds in system booting! Enter BIOS setup menu and save the memory se or visit ASUS website (www.asus.com) for latest BIOS version.
CPU Over Voltage Error!
When RAID configuration was built, ensure to set SATA Configuration to RAID mode.
Press F1 to Run SETUP
Troubleshooting steps tried:
- Press CMOS+CLR button
- Remove CMOS battery and put it back in after 5 min (Didnt have replacement handy)
- Remove all USB devices except keyboard.
- Downloaded latest bios version from the website and inserted the usb device in "CMOS flash" usb port.
Let me know if anyone else had similar issues or can recommend further debugging steps.