I recently purchased a new motherboard to replace the Gigabyte. I purchased an Asus A7N8X-E Deluxe. During posting the processor was being ran at 1100mhz and running in cpu safe mode. It informed me to correct the speed. I did that and when I would save to CMOS and exit, the computer would shut down. I would have to flip the power switch on the PSU to off and back on to turn the computer back on. The jumper for the FSB is set for 400/333/266 yet the cpu will not clock at the speed it is supposed to be. In order to get into Windows I have to set the FSB to 100 in the BIOS. I'm beginning to get very frustrated and cannot figure this out. Please help. I formatted the hardrive with a fresh install of Windows XP Pro on it just to clear out any old motherboard drivers.