Hi, two days ago i took apart my computer to clean the dust out. when i put everything back i would get no signal on the monitor. I have taken apart and cleaned my comp a few times before so I'm confident i put everything back correctly. Heres what ive tried after searching google. i cant use onboard graphics since i have an amd motherboard (replacing it soon).
MONITOR
GRAPHICS
MOTHERBOARD
SPECS
cpu -------------amd fx 9590
graphics -------gtx 1080 8gb
motherboard -gigabyte GA-990FXA-ud3 ATX AM3+
RAM -----------Ripjaws x seriers 2x2gb and 2x 4gb
power ---------Corsair VS 550 W 80+
thanks for any help.
MONITOR
- checked if my monitor works (it does)
- checked the cables for monitor (working)
- removed power and checked if it was loose
GRAPHICS
- moved my graphics card to a different slot
- used a different graphics card
- checked the power on the graphics card (it gets power fans moving)
MOTHERBOARD
- unplugged everything and reset CMOS
- check cpu and made sure it was correct
- rearranged my ram
SPECS
cpu -------------amd fx 9590
graphics -------gtx 1080 8gb
motherboard -gigabyte GA-990FXA-ud3 ATX AM3+
RAM -----------Ripjaws x seriers 2x2gb and 2x 4gb
power ---------Corsair VS 550 W 80+
thanks for any help.