Question Configure MOBO Jumper for SATA m.2 SSD?

[JudithWright]

I have an X79 motherboard from AliExpress and a SATA m.2 SSD

The default configuration is for NVME m.2 and I am not sure how to change these connector clips on the motherboard so that the SATA m.2 can work.

Images are attached here:

https://imgur.com/a/kBDF6d0

View: https://imgur.com/a/kBDF6d0


If it's hard to see the motherboard looks like this: NVME MODEL : 1-3 2-4 / SATA MODEL : 3-5 4-6

 

[USAFRet]

I have an X79 motherboard from AliExpress and a SATA m.2 SSD

The default configuration is for NVME m.2 and I am not sure how to change these connector clips on the motherboard so that the SATA m.2 can work.

Images are attached here:

https://imgur.com/a/kBDF6d0

View: https://imgur.com/a/kBDF6d0


If it's hard to see the motherboard looks like this: NVME MODEL : 1-3 2-4 / SATA MODEL : 3-5 4-6

The info can only come from the manufacturer.
There is no universal jumper position.

 

[JudithWright]

The info can only come from the manufacturer.
There is no universal jumper position.

It looks like the configuration is shown on the motherboard itself (often the case for Aliexpress motherboards, from that I have seen).

But I don't understand what the numbers mean -

 

[USAFRet]

It looks like the configuration is shown on the motherboard itself (often the case for Aliexpress motherboards, from that I have seen).

But I don't understand what the numbers mean -

1 2 3 4 5 6 would presumably be the pins.

From your pic, I can't tell which pins are which.

 

[boju]

I am not sure how to change these connector clips on the motherboard

Those jumpers pull out, connect jumpers to the described pins for the m2 operation you want.