[SOLVED] CPU temps extremely unstable with AIO installed

[Yasin106]

Hi. I have a cooling problem. So, my CPU temps at idle is between 50-67, and when gaming it's between 65-81. I'm even on a liquid cooler. My temps jump with 10-17 degrees - how is this possible? Also, it's a new rig and therefore i'm worried.

 

[CountMike]

Hi. I have a cooling problem. So, my CPU temps at idle is between 50-67, and when gaming it's between 65-81. I'm even on a liquid cooler. My temps jump with 10-17 degrees - how is this possible? Also, it's a new rig and therefore i'm worried.

Which CpU and AIO ?

 

[Yasin106]

Which CpU and AIO ?

7 3700X and Masterliquid ML240L rgb. But i used MSI Afterburner, but when i use Ryzen Master, it shows 37°. Is Ryzen Master more reliable than Afterburner?

 

[CountMike]

7 3700X and Masterliquid ML240L rgb. But i used MSI Afterburner, but when i use Ryzen Master, it shows 37°. Is Ryzen Master more reliable than Afterburner?

Yes RM is more accurate and so is HWinfo64.
Check temps under load with them or either one. Also check cooler connections and make sure that pump runs at full speed.

 

[Yasin106]

Yes RM is more accurate and so is HWinfo64.
Check temps under load with them or either one. Also check cooler connections and make sure that pump runs at full speed.

How do i check my pump-speed?

 

[CountMike]

How do i check my pump-speed?

Pump should be connected to AIO_Pump header on the MB if your MB has it, they are usually not adjustable, or a Chassis fan header set In BIOS to DC control and for full speed. You can see it's speed in BIOS or any program like HWinfo.

 

[Yasin106]

Pump should be connected to AIO_Pump header on the MB if your MB has it, they are usually not adjustable, or a Chassis fan header set In BIOS to DC control and for full speed. You can see it's speed in BIOS or any program like HWinfo.

It's already on DC. Also, it is on 100%. But should i use RM or MSI Afterburner?

 

[CountMike]

It's already on DC. Also, it is on 100%. But should i use RM or MSI Afterburner?

RM and HWinfo.

 

[Yasin106]

RM and HWinfo.

Alright. That was the problem. Now, it shows 37° at idle. Thanks!