Question do I have enough PCIe lanes?

sspeed

Distinguished
Dec 14, 2009
27
0
18,530
I am using an Asrock B660M-ITX/ac motherboard.

I have 4 SATA SSDs, 1 NVMe SSD. Nic is Intel(R) 82599 10 Gigabit Dual Port. Also has an onboard Intel I219-V nic. It's a homelab esxi.

From my understanding. the 82559 nic takes 8 chipset PCIe lanes. What gen though? Each SATA takes 1. But what gen? NVMe has 4 to the CPU. I assume the 82559 takes gen3 lanes and the SATA as well?

Either way, I seem to be limited by the B660 with 6 PCIe 4.0 ports and 8 PCIe 3.0 ports? Between the 4 SATA SSDs and 82559 nic I am using 12 Gen3 PCIe lanes? Just wondering if I should look for a used H670 or Z690 board? Or do the 6 PCIe 4.0 lanes function as 3.0 when nothing else is on them?
 
From my understanding. the 82559 nic takes 8 chipset PCIe lanes. What gen though?
82559 nic works in PCIE 2.0 mode.
Each SATA takes 1. But what gen?
No. Sata goes through chipset.
NVMe has 4 to the CPU.
Yes.
I assume the 82559 takes gen3 lanes and the SATA as well?
No. PCIE slot is connected to cpu PCIE lanes. But 82559 works in PCIE 2.0 mode.
Either way, I seem to be limited by the B660 with 6 PCIe 4.0 ports and 8 PCIe 3.0 ports?
What? Please elaborate.
 
  • Like
Reactions: Dashhh

sspeed

Distinguished
Dec 14, 2009
27
0
18,530
I added a Gen4 NVMe, expecting it to be snappier. ESXi backups to a Synology 1817+ are actually taking longer than when the VMs were on a SATA SSD. Can't figure out why, so wondering if ran out of lanes.
 

sspeed

Distinguished
Dec 14, 2009
27
0
18,530
WD Black SN850X. CrystalDiskMark is showing expected performance, but backups over the 10gbit wire are definitely slower, about 20 min slower on a 2.5hr backup.